Catalogs >
GIVI MISURE >
MAGNETIC SENSOR MTS P

MAGNETIC SENSOR MTS P
1 / 2Pages

Catalog excerpts

Via Assunta, 57 - 20834 Nova Milanese (MB) - ITALY Tel. +39 0362 366126 Fax +39 0362 366876 www.givimisure.it sales@givimisure.it As a standard, the sensor is supplied with a 2-m cable. Longer lengths are available, with the following limits: Lmax = 10 m sensor cable Lm,x = 100 m 2 m sensor cable + cable extension * Better accuracy can be obtained by reducing the gap between Cable extensions need to have a 0.5 mm section for power supply conductors. To obtain the declared accuracy values, it is necessary to respect the alignment tolerances prescribed by the Manufacturer. the sensor and the magnetic band. The indicated speeds are referred to a maximum frequency of 300 kHz. GIVI MISURE S.R.L. A SOCIO UNICO C.F. e Iscrizione al Reg. Imprese di Monza e Brianza n° 04355540156 - Cap. Soc. € 51.480,00 I.V. Pag. 1/2 COMPANY WITH QUALITY SYSTEM CERTIFIED BY DNV GL = ISO 9001

Open the catalog to page 1

Via Assunta, 57 - 20834 Nova Milanese (MB) - ITALY Tel. +39 0362 366126 Fax +39 0362 366876 www.givimisure.it sales@givimisure.it PUSH-PULL SENSOR DIMENSIONS values in mm s = thickness d = distance to be maintained between sensor and surface of the magnetic band (or eventual cover/support) ORDERING CODE MODEL POLE PITCH REFERENCE INDEXES POWER SUPPLY OUTPUT SIGNALS CABLE CONNECTION PROGRAMMING SPECIAL 528V = 5+28 Vdc L = LINE DRIVER M01/N = 1 m SC = without F = fixed No cod = standard 5285 = 5+28 Vdc Q = PUSH-PULL M02/N = 2 m connector V = variable SPnn = special nn with 5 V output M03/N =...

Open the catalog to page 2