- Catalogs
- GIVI MISURE
- A40-B
- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
A40-B
A40-B
- The MTV P is a magnetic sensor designed for linear and angular readings with resolutions up to 0.1 µm.
- It features contactless reading and easy installation with wide alignment tolerances, suitable for narrow spaces.
- The sensor uses a magnetic band made of magnetized plastoferrite tape supported by stainless steel, compatible with the MP100 magnetic band.
- Mechanical: The sensor has a die-cast body and can be mounted using M4 or M3 screws, with wide alignment tolerances.
- Electrical: It includes a flexible power cable and uses a positioning sensor based on magneto resistance with AMR effect, ensuring high signal stability and protection against power supply polarity inversion and short circuits.
- The standard cable is an 8-wire shielded cable with a 6.1 mm diameter, oil-resistant PVC sheath, and specific conductor sections for power supply and signals.
- Maximum cable lengths are 10 m for the sensor cable and 100 m for the sensor cable plus extension.
- The sensor outputs sine wave signals (A, B, and I0) with a typical amplitude of 1 Vpp and a phase displacement of 90° ± 10° electrical.
- Signal amplitude is measured differentially with a 120 Ω impedance and a minimum power supply voltage of 5 V.
- Accuracy is ±6 µm, with a maximum traversing speed of 12 m/s and a maximum frequency of 12 kHz.
- It has a vibration resistance of 300 m/s² and shock resistance of 1,000 m/s², with an IP67 protection class.
- Operating temperature ranges from 0°C to 50°C, and storage temperature from -20°C to 80°C, with 100% relative humidity.
- The ordering code for the sensor includes model, pole pitch, reference indexes, power supply, output signals, cable connection, and any special requirements.
- Example: MTV P 1K C 528V S M02 / N SC.
- Products may be subject to modifications for improvement without prior notice.
Catalog excerpts
Via Assunta, 57 - 20834 Nova Milanese (MB) - ITALY As a standard, the sensor is supplied with a 2-m cable. Longer lengths are available, with the following limits: Lmax = 10 m sensor cable Lmax = 100 m 2 m sensor cable + cable extension * Cable extensions need to have a 0.5 mm2 section for power supply conductors. Depending on CNC division factor. Better accuracy can be obtained by reducing the gap between To obtain the declared accuracy values, it is necessary to respect the alignment tolerances prescribed by the Manufacturer. the sensor and the magnetic band. GIVI MISURE S.R.L. A SOCIO UNICO C.F. e Iscrizione al Reg. Imprese di Monza e Brianza n° 04355540156 - Cap. Soc. € 51.480,00 I.V. COMPANY WITH QUALITY SYSTEM CERTIFIED BY DNV GL
Open the catalog to page 1
Via Assunta, 57 - 20834 Nova Milanese (MB) - ITALYTel. +39 0362 366126 Fax +39 0362 366876 www.givimisure.it [email protected] Code OUTPUT SIGNALS Release TECHNICAL DATASHEET SENSOR DIMENSIONS values in mm d = distance to be maintained between sensor and surface of the magnetic band (or eventual cover/support) P = 1+1 mm 1K = 1 mm C = constant step 528V = 5+28 Vdc S = sine wave M01/N = 1 m connector SPnn = special nn
Open the catalog to page 2All GIVI MISURE catalogs and technical brochures
ST022 Pages
ST082 Pages
ST042 Pages
ST064 Pages
ST024 Pages
BROCHURE GVS 202 S4 Pages
BROCHURE MAGNETIC SYSTEMS4 Pages
BROCHURE GVS 600-6084 Pages
BROCHURE GVS 900 SERIES4 Pages
GENERAL CATALOG 202619 Pages
GVS 5084 Pages
GVS 8084 Pages
Archived catalogs
THESI 3202 Pages
THESI 3102 Pages
VI5182 Pages
GVS6 Pages
AGS2 Pages
AGM2 Pages
AEN582 Pages
VISION 5182 Pages
VISION 9005 Pages
MAGNETIC SENSOR MTV P2 Pages
REMOTE BOARD RB9002 Pages
GENERAL CATALOGUE84 Pages
GVS 2006 Pages
MTT-MTB2 Pages
VI9002 Pages
GVS 2046 Pages
- GIVI MISURE rotary encoder
- GIVI MISURE incremental encoder
- Incremental rotary encoder
- Digital indicator
- Absolute rotary encoder
- Panel panel meter
- Solid-shaft rotary encoder
- Optical rotary encoder
- Hollow-shaft rotary encoder
- HMI
- HMI with touch screen
- IP65 rotary encoder
- Compact rotary encoder
- IP67 rotary encoder
- Aluminum rotary encoder
- DC rotary encoder
- LCD HMI
- GIVI MISURE linear encoder
- Flange rotary encoder
- Position indicator