FLUID STANDARD EQUIPMENT: • Cover, used for transport • Fluid emptying system • Support for sensors • Power supply cable • Fuses kit • Thermostat connection cables • Test report • Instruction manual • RS232 serial interface • Cordura® soft bag • Kit of clamp connections (only 2I version) PORTABLE LIQUID TEMPERATURE CALIBRATOR ALUMINIUM INSERT Standard version convert Fluid in a dry block calibrator. Version fitted with 2 adjustable inputs PORTABLE LIQUID TEMPERATURE CALIBRATOR Operating range: -18 °C / +250 °C (-0,4 °F / 482 °F) Check and calibration of temperature sensor in the laboratory as well as in the field in compliance of ISO 9000 regulations Standard version Every hole has a 160 mm (6,2in.) depth Version fitted with 2 adjustable inputs FLUID 100 FLUID H100 • Bottle (500 cc) of silicon oil 47V10. Standard version FLUID 200 • Bottle (500 cc) of silicon oil 47V20. • Bottle (500 cc) of silicon oil 200C5. Version fitted with 2 adjustable inputs Checking glass thermometers Checking thermostats Standard version FLUID H200 • Bottle (500 cc) of silicon oil 47V50. EXTENTION TUBE increasing the depth of the liquid tank. Total depth: 230 mm (9 in.) Version fitted with 2 adjustable inputs FLUID H200 2I - 1 - 115 V 50/60 Hz • Aluminium insert - 2D2846 • Blank aluminium insert • Custom aluminium insert • Extention tube - PROLUNGA FLUID • AQ2sp software. • Pt100 sample probe. • RS232 serial cable. • USB/RS232 converter. • Accredia certificate (only 2I version) performed by a sample probe connected to FLUID GIUSSANI S.r.l. Via dei Crederi, 411 24045 Fara Gera d’Adda (BG) - Italy Tel.: 0363/399019 - Fax.: 0363/398725 www.giussanionline.it [email protected] CERTIFICATION: All instruments are supplied with final testing,

FLUID FLUID PORTABLE LIQUID TEMPERATURE CALIBRATOR COMPARISON TABLE: liquid calibrators used for checking thermocouples and platinum resistance Technical specification thermometers in the laboratory as well as in the field. It consists of an aluminium Room temp. ÷ +200 °C Room temp. ÷ +392 °F Room temp. ÷ +250 °C Room temp. ÷ +482 °F Hole depth Hole diameter Display Resolution Operating range vessel whose capacity is about 400 cc and it is constantly kept homogenous by a Average heating time (stabilization included) magnetic mixer whose speed is adjustable according to the viscosity of the fluid...

FLUID FLUID PORTABLE LIQUID TEMPERATURE CALIBRATOR COMPARISON TABLE: liquid calibrators used for checking thermocouples and platinum resistance Technical specification thermometers in the laboratory as well as in the field. It consists of an aluminium Room temp. ÷ +200 °C Room temp. ÷ +392 °F Room temp. ÷ +250 °C Room temp. ÷ +482 °F Hole depth Hole diameter Display Resolution Operating range vessel whose capacity is about 400 cc and it is constantly kept homogenous by a Average heating time (stabilization included) magnetic mixer whose speed is adjustable according to the viscosity of the fluid...

FLUID STANDARD EQUIPMENT: • Cover, used for transport • Fluid emptying system • Support for sensors • Power supply cable • Fuses kit • Thermostat connection cables • Test report • Instruction manual • RS232 serial interface • Cordura® soft bag • Kit of clamp connections (only 2I version) PORTABLE LIQUID TEMPERATURE CALIBRATOR ALUMINIUM INSERT Standard version convert Fluid in a dry block calibrator. Version fitted with 2 adjustable inputs PORTABLE LIQUID TEMPERATURE CALIBRATOR Operating range: -18 °C / +250 °C (-0,4 °F / 482 °F) Check and calibration of temperature sensor in the laboratory as...