video corpo

Electric chain hoists entertainment LP
16Pages

{{requestButtons}}

Catalog excerpts

Electric chain hoists entertainment LP - 1

ELECTRIC CHAIN HOISTS ENTERTAINMENT

Open the catalog to page 1
Electric chain hoists entertainment LP - 2

Sydney Opera House Stephen Batten, CEO, Hasemer Materials Handling. «The GIS hoist provides the perfect solution for the entertainment industry. Its quiet operation, lightweight size and wide range of options enable us to tailor the hoist to exactly what our customers require. Furthermore, if a customer's solution changes, in many situations the GIS hoist can be modified rather than replaced, increasing the productivity of our customers' fleet of hoists.» Opera House Sydney, Australia I Entertainment Centre Sydney, Australia I Exhibition Centre, Sydney, Australia I Perth Arena, Australia I...

Open the catalog to page 2
Electric chain hoists entertainment LP - 3

LIGHT AND POWERFUL Simple and easy to use – reliable and safe in operation – longlasting and easy to maintain. In theatres, schools, sports centres, event venues, multifunction event venues, arenas, congress centres, TV studios or on concert tours, GIS chain hoists are in use worldwide. Developed and manufactured in Switzerland – for the world market. GIS Entertainment Electric Chain Hoists – safe in all weathe

Open the catalog to page 3
Electric chain hoists entertainment LP - 4

Customer specific Low dead weight from 12 kg Three- or single-phase power Direct or contactor control Self-contained gearbox with permanent lubrication Use as stationary or climbing hoist without modification Worldwide operating and control voltages Reliable spring-loaded DC brake Geared limit switch with high positioning accuracy Special speeds Quiet running with 3-step drive and helical gearing High safety in operation No sensitive electronics Housing and cover made of aluminum Excellent synchronisation of motors Corrosion resistant profile steel chain with increased service life...

Open the catalog to page 4
Electric chain hoists entertainment LP - 5

LPM250, the smallest chain hoist of the LP-family, weighing only 1 kg, lifts up to 250 kg as a D8 2 P lus motor. LP500 D8 Plus, weigh ing only 23 kg, lifts 500 kg. The LP motors are modular in design and is even with a second brake compact in construction. Thus, they can be transported in flight cases for mobile use, saving space and costs. All LP motors are equipped with a 3-stage self-contained gear. The helical gearing with geome tric optimisation and the chain wheel with minimum 5 pockets ensure extremely quiet running. This allows the quiet handling of loads during events. Thanks to...

Open the catalog to page 5
Electric chain hoists entertainment LP - 6

HOLDING LOADS ABOVE PEOPLE WITH SECONDARY SAFETY COMPONENT The D8 motor corresponds to a standard industrial electric chain hoist in accordance with EN14492-2 and IGVW SQP2:2018 with the differ ence that the D8 motor is usually used without a handheld controller and in mobile event technology climbing on its chain. As an additional securing measure, the installation of a secondary safety component is required to fix the load. GIS motors in D8 execution are applicable as climbing or stationary hoists without modification up to 3200 kg lifting capacity in single fall operation or 6300 kg in...

Open the catalog to page 6
Electric chain hoists entertainment LP - 7

Standard version 42 V low voltage control with geared limit switch Lifting capacities (chain safety factor minimum 5:1): 1-fall up to 3200 kg 2-fall up to 6300 kg Second, independent brake Worldwide operating and control voltages Lifting speeds up to 32 m/min. at 50 Hz Safety load locking hook Geared limit switch with two additional emergency stops Safety radio remote control Direct control Ergonomic control switch on cable Preparation for encoder on chain wheel or rotor shaft Suitable for frequency inverted operation Incremental encoder for path measurement Housing and cover made of...

Open the catalog to page 7
Electric chain hoists entertainment LP - 8

HOLDING LOADS ABOVE PEOPLE WITHOUT SECONDARY SAFETY COMPONENT The GIS motor in D8 Plus version is an electric chain hoist which is specifically developped, rated and designed for holding loads above people. It is light and compact in design and thus perfectly suited for mobile use. All components which are in the flow of forces are statically dimensioned for the double of the nominal rated capacity. D8 Plus motors are suitable for climbing and stationary hoists without any modifications. The maximum lifting capacity in single fall execution is 2500 kg at a chain safety factor of minimum 8:1...

Open the catalog to page 8
Electric chain hoists entertainment LP - 9

Standard version D8 Plus motor in accordance with EN14492-2, SQP2:2018, DIN56950, EN17206 42 V low voltage control with geared limit switch Lifting capacities (chain safety factor minimum 8:1): 1-fall up to 2500 kg 2-fall up to 3200 kg Lifting speeds up to 32 m/min. at 50 Hz Worldwide operating and control voltages Safety load locking hook Geared limit switch with two additional emergency stops Safety radio remote control Ergonomic control switch on cable Direct control Preparation for encoder on chain wheel or rotor shaft Incremental encoder for path measurement Suitable for frequency...

Open the catalog to page 9
Electric chain hoists entertainment LP - 10

HOLDING AND MOVING LOADS ABOVE PEOPLE The GIS motor in C1 version is an electric chain hoist which is specifically developped, rated and designed for holding and moving loads above people. It is light and compact in design and thus perfectly suited for mobile use and responds to the requirements in accordance with EN14492-2, IGVW SQP2:2018 and EN17206. Due to the modular design of the GIS chain hoist, the path and load measurement can be implemented in a simple way. Encoders for path measurement can be mounted on the chain wheel or on the rotor shaft. Due to the high power reserve of the...

Open the catalog to page 10
Electric chain hoists entertainment LP - 11

Standard version Worldwide operating and control voltages Lifting capacities (chain safety factor minimum 10:1): 1-fall up to 2000 kg Load sensor: output signal 4 - 20 mA Standard voltages: 3 × 400 V / 50 Hz, 3 × 230 V / 50 Hz Interface for control system provided by the customer Lifting speeds up to 32 m/min. at 50 Hz Mechanical protection for load sensor Preparation for path measurement with absolute encoder on chain wheel (without encoder) Preparation for path measurement with incremental or absolute encoder on rotor shaft (without encoder) Suitable for frequency inverted operation...

Open the catalog to page 11
Electric chain hoists entertainment LP - 12

ACCESSORIES & OPTIONS Second brake Each D8 chain hoist can be option lly a equipped with a second, in dependent brake. In a few simple steps, it is mounted on the existing drive shaft just behind the first brake. It is optionally available with brake surveillance. The mechanical interlocking of the hook lug of the 360° rotatable and 180° swivelling safety load locking hook secures the transported goods. The load hook closes automatically under load and must be manually unlocked for opening. As a climbing hoist, the electric chain hoist can be lifted out of the transport packaging with its...

Open the catalog to page 12

All GIS AG catalogs and technical brochures

Archived catalogs

  1. Trolley GHF

    2 Pages

  2. GIS vacuum

    12 Pages