Overview

This document provides technical specifications and application details for the SR-G series magnetic and tactile sensors from Gimatic. These sensors are designed for industrial automation applications, particularly for detecting positions and strokes in linear actuators, grippers, and robotic kits.

Sensor Types and Features

• Magnetic Sensors: Reed sensors with digital output activated after passing the switching point.
• Touch Sensors: Equipped with silicone tips to prevent damage to contacted products.
• 100% traceability ensured for quality control.

Mechanical Specifications

• Maximum stroke: 15.5 mm
• Dimensions: M14 x 1 thread, 75 mm length, 43 mm diameter, 8.5 mm tip diameter
• Tip material: Silicone
• Ring material: Nickel-plated brass

Electrical Specifications

Electrical Connections

• Brown wire (BN): Positive (+)
• Blue wire (BU): Negative (-)

Operating Principles

The reed sensor activates its digital output once the switching point is passed during the sensor stroke. The switching point is not included in the stroke measurement but is critical for sensor activation.

Applications

These sensors are suitable for use in various industrial automation components such as rotary units, tool changers, profiles and holders, suspensions, linear drives, linear actuators, grippers, cutters, nippers, and robot kits.

Best Practices and Recommendations

• Use silicone tips to avoid damage to sensitive products during contact.
• Ensure proper wiring according to the brown (+) and blue (-) cable connections.
• Operate within specified temperature and electrical limits to guarantee sensor longevity and reliability.
• Maintain IP67 protection by ensuring proper sealing during installation.