LevelSlick

LevelSlick

LevelSlick

Product catalog summary
Overview
LevelSlick is a specialist level sensor designed for use in electrically conductive liquids, offering reliable and low-maintenance operation. It is suitable for challenging environments, including those with particles, suspended matter, viscous, and corrosive fluids.

Applications
Typical applications include water utilities, marine waste water, industrial processes, and corrosive liquid storage. The sensor can be used in remote locations with additional equipment.

Key Features
  • Non-stick PTFE coating for low maintenance.
  • Durable enclosed electronics.
  • Tank profiling system for irregular tank shapes.
  • User-defined full and empty alarms.
  • Available in voltage, current, or resistive versions up to 2m long.

Benefits
  • Continuous level measurement in conductive liquids.
  • Operates in the presence of sediment and suspended matter.
  • No moving parts to cause mis-readings.
  • Accurate measurement in irregularly shaped tanks.
  • Compatible with wireless systems and calibration software.

Specifications
General
  • Measurement Type: Conductive
  • Accuracy: +/- 10% FSD at 20°C
  • Liquid Compatibility: All electrically conductive liquids

Outputs
  • Voltage: 0.25V—4.75V DC
  • Current: 4-20mA
  • Resistive: Simulated 10-180Ω or 240-330Ω

Environmental
  • Ingress Protection: IP66 / IP68
  • Operating Temperature: -40°C to +85°C
  • Humidity: 93% RH at 40°C

Mechanical
  • Construction: Stainless steel 316, FEP, EDPM
  • Tank Seal Options: EDPM O-ring or Klingersil panel gasket

Electrical
  • Supply Voltage: +6V to +32V DC
  • Over Voltage Protection: 50V DC
  • Resolution: 12 bit (4096 points)

Dimensions
  • Overall Length: Probe length + 28.6mm
  • Mounting Flange Height: 28.6mm
  • Sensor Mounting: 1.25" BSP thread

Ordering Information
Available in various length ranges and output types, with a universal BSP 1.25” thread mounting.

For more information, contact Gill Sensors & Controls.
See more

Catalog excerpts

LevelSlick-1

Specialist level sensors for challenging liquids Total reliability, whatever the media LevelSlick has been designed for use in all electrically conductive liquids where reliable, low maintenance operation is important. Using a special PTFE coating allows the sensor to operate in challenging liquids that contain particles or suspended matter, and also in viscous liquids and corrosive fluids whilst maintaining reliable measurement without the high maintenance that would otherwise be necessary. Used with additional equipment the sensor can be installed in remote locations where regular maintenance is challenging. Water Utilities Waste Water Marine Waste Water Industrial Processes Corrosive Liquid Storage Non-stick PTFE coating for low sensor maintenance Highly durable enclosed electronics + Tank Profiling system allows measurement in irregular tank shapes e User defined full & empty alarms e Resistive versions for use with gauges Universal BSP 1.25” thread mounting Sensor with sealed electronics Voltage, current or resistive versions up to 2m long available Continuous level measurement in electrically conductive liquids Works in the presence of sediment & suspended matter No moving parts to block or stick causing mis-readings Accurate measurement from irregular shaped tanks No signal drop-outs or lost data from flat batteries Compatible with wireless systems gillsc.com 7014 LevelSlick Datasheet Iss 9 © 2021 Gill Sensors & Controls Limited

 Open the catalog to page 1
LevelSlick-2

Specialist level sensors for challenging liquids Total reliability, whatever the media ACCURACY (PRIMARY OUTPUT) Measurement Type Primary Output Liquid Compatibility All electrically conductive liquids Thermal Drift +/- 10% FSD over full temperature range Current—Primary# Resistive—Primary# Stainless steel 316, FEP, EDPM Tank Seal Options EDPM O-ring or Klingersil panel gasket Cable Type Marine standard screened cable Cable Temp Rating (Max 10-1000Q2 or 1000-1002) Open collector output 50 / 0.5A max switch to ground (V-) Cable Pull Probe Length *Supply voltage to be at least 0.5V greater than...

 Open the catalog to page 2
LevelSlick-3

Specialist level sensors for challenging liquids Total reliability, whatever the media I Switch Output Bare drain wire Overall Length Sensor Mounting Mounting Flange Height Measurement Range Cable Position Length Range set Lengths): Output Type: Mounting Thread: For more information about LevelSlick please contact Gill Sensors & Controls. gillsc.com © 2021 Gill Sensors & Controls Limited Designed and manufactured in the UK by Gill Sensors & Co

 Open the catalog to page 3
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.