1615 LIQUID LEVEL DISPLAY

Product catalog summary

Product Overview
The 1615 Liquid Level Display is designed for clear and straightforward liquid level indication, suitable for tanks with irregular shapes. It features a volume display and low-level warning, is fully programmable, and easy to install. The device is lightweight and equipped with 29 extra-bright LEDs for enhanced visibility.

Environmental Specifications

Ingress Protection: IP65
Operational Temperature: -10° to +80°C
EMC Immunity Level: Complies with SAE J1113/2 1996 design guideline
Vibration: 15g RMS (24-2000Hz) in accordance with SAE J1455 design guidelines
Finish: Anodised to ISO7599

Mechanical Specifications

Dimensions: Refer to the drawing provided
Mounting: Two M4 threaded holes on a 106mm centre

Connection Details

Connector: Integral Microfit III

Electrical Specifications

Supply Voltage: 9-30V DC
Supply Current: Less than 140mA at 12V
Serial Interface: RS232 (+5V)
Resolution: 10 bit

Analogue Input

Voltage Input Range: Configurable 0 - 5V

Ordering Information

Model: 1615-00-039 with Black Anodise to ISO7599
Cable Harness: 1615-10-036 (supplied)

Wiring Designation

Harness Dimensions: Various lengths provided
Connector: Molex Micro-Fit 3.0
Pinout Information:
- Pin 1 (Red): Supply (+Vs)
- Pin 2 (Black): Ground
- Pin 7 (Green): Rx (calibration only)
- Pin 10 (Orange): Analogue output

Catalog excerpts

1615 LIQUID LEVEL DISPLAY Clear, straightforward liquid level display Tank profiling for irregular shaped tanks Volume display and low level warning Fully programmable Easy installation Lightweight 29 extra-bright LEDs Supply voltage Ingress Protection Supply current Serial Interface Operational temperature 15g RMS (24-2000Hz) & SAE J1455 design guidelines used ANALOGUE INPUT Voltage input range CONNECTION Integral connector Two M4 threaded holes on a 106mm centre Cable harness = 1615-10-036 (supplied) More information at gillsc.com E [email protected] T +44 (0)1590 613900 Sensors & Controls

Open the catalog to page 1

1615 LIQUID LEVEL DISPLAY DIMENSIONS Pinout Information to Harness Molex Micro-Fit 3.0 Connector Pin 10 HARNESS DIMENSIONS Micro-Fit 3 Receptacle 10 Way Dual Row WIRING DESIGNATION Colour Analogue output More information at gillsc.com E [email protected] T +44 (0)1590 613900 Sensors & Controls

Open the catalog to page 2

All Gill Sensors & Controls catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list