1498 ROTARY POSITION SENSOR Full 360°, configurable non-contact position sensing Analogue / digital output Fully configurable range Non-contact reliability Full 360° measurement Unlimited mechanical life Submersible ANALOGUE OUTPUT Measurement range Supply voltage Voltage output range 0 - 5.5V (unless limited by V supply) Over voltage protection Range accuracy ±0.5° over temperature range Supply current Error level Reverse polarity protection 10 bit over configured range Measurement range Sample rate Rise time Pulse energy absorption SERIAL OUTPUT Data type MECHANICAL Size Protection Operating temperature Mounting torque 22.8 grams (0.8 ounces) excluding cable Tinned steel, EN3B painted mild steel or similar, plastic/copper foil. Contact Gill for more details Materials compatibility May be used as V Ref or switch from V supply to ground Sensor - activator clearance Activator materials Sensor - activator concentricity SWITCH OUTPUT Water, engine oil, engine coolant, diesel fuel, gasoline, salt spray, degreaser, degreaser tsp, ammonia and dust. All common automotive liquids and materials *The sensor samples the position at 1ms intervals. Each sample is processed then made available via an analogue filter with a rise time of 1.5ms. The total delay to 50% output is approximately 2ms. Wiring options: 068 = 26 AWG side exit cable (preferred stock product) 069 = 26 AWG centre exit cable 070 = 20 AWG heavy duty cable Tinned mild steel activator = 1498-30-065 More information at gillsc.com E [email protected] T +44 (0)1590 613900

1498 ROTARY POSITION SENSOR DIMENSIONS - SENSOR 16.00 0˚ M3 Threaded insert (5mm Thread depth) The sensor requires a metallic activator to be mounted 0.5-2mm away from the sensing face. This can either be mechanically mounted to the end of a rotating shaft or machined into the tip of a rotating part. Shown right is a drawing showing the dimensions of the activator for optimum performance. Please consult Gill for more information on activator design. DIMENSIONS - ACTIVATOR System & power ground (GND) Switch output Serial comms input (Rx), RS485 compatible Serial comms output (Tx), RS485 compatible...