MetPak Weather Station
3Pages

{{requestButtons}}

Catalog excerpts

MetPak Weather Station - 1

Weather Station 6 Reference Quality Parameters Key Features Wind Speed & Direction Barometric Pressure Rugged Professional Design NMEA Output Gill ASCII Output MetPak weather station utilises Gill WindSonic ultrasonic technology, a highly accurate barometric pressure sensor and a Rotronic Hygroclip HC2-S3 temperature/humidity probe. The design of the MetPak allows measurements to be as accurate as possible without influencing other measured parameters yet provides a compact, reference quality system. The unit is especially suitable for harsh or marine environments. Base Station Options Available MetPak can be configured with a fixed or remote wind sensor. See page 3 for all wind sensor options. Included: MetSet configuration software MetView data logging/visualisation software Mounting kit to adapt to poles or masts. Mounting Pipe (not supplied) Ease of connection for remote heated wind sensors.

Open the catalog to page 1
MetPak Weather Station - 2

6 Reference Quality Parameters MetPak integrates industry leading products in a convenient, economical package allowing users to concentrate on the measurement rather than the quality of the measurement. Calibration services available from Gill. Wind Measurement Power Supply Wind speed & direction or U & V (Vectors) Input voltage Wind Direction Input voltage Outputs Digital outputs Baud rates Data output RS232, RS422, RS485* or SDI-12 (user selectable) * 2 wire point to point Environmental Protection class Range Accuracy Resolution Compensated for temperature dependency Operating humidity...

Open the catalog to page 2
MetPak Weather Station - 3

6 Reference Quality Parameters Wind Sensor Options Base Station MetPak is available as a Base Station which enables the system to be specified with a remote wind sensor if required. This sensor can be positioned away from the Base Station and a connection cable is provided.The Base Station has been tested in accordance with BSEN 60945 and is suitable for use in marine environments. This system can also be specified without a wind sensor if wind measurement data is not required. The MetPak can be specified with a remote sensor from any of the options below: Wind Sensor Options For wind speed...

Open the catalog to page 3

All Gill instruments catalogs and technical brochures

  1. Wind Display

    1 Pages