Weather Station Expandable, up to 10 Reference Quality Parameters Key Features Wind Speed & Direction Barometric Pressure Digital Input (tipping bucket rain gauge) Gill ASCII Output MetPak Pro monitors the most essential weather parameters with the additional ability to connect up to four external measurement devices. The system combines a Gill WindSonic ultrasonic wind speed & direction sensor, a highly accurate barometric pressure sensor and Rotronic Hygroclip temperature/humidity probe. MetPak Pro contains a PCB allowing users to conveniently add additional parameters using industry standard formats. Additional inputs allow for connection of a Pt100 temperature sensor, tipping bucket rain gauge (available from Gill) and two analogue sensors (water level sensor, pyranometer, pressure sensor, soil temperature sensor etc). Base Station Options Available MetPak Pro can be configured with optional rain gauge and remote sensors. See page 3 for wind sensor options. Included: MetSet configuration software MetView data logging/visualisation software Mounting kit to adapt to poles or masts. User Power & Comms Power & Comms To Metpak Pro Sensor Data To Metpak Pro Analogue Input 1 Analogue Input 2 Mounting Pipe (not supplied) MetPak Pro Junction Box The optional junction box allows an alternative method to connect the sensors to the MetPak in a convenient separate box. Pt100 Input Contact Closure (For Rain Gauge) User Power For Additional Sensors Heater Interface Box Ease of connection for remote heated wind sensors.

Expandable, up to 10 Reference Quality Parameters The MetPak Pro integrates industry leading products in a convenient, economical package allowing users to concentrate on the measurement rather than the quality of the measurement. Calibration services available from Gill. Wind Measurement Parameters Units of measure Digital outputs RS232, RS422, RS485* or SDI-12 (user selectable) * 2 wire point to point Baud rates Data output Wind speed & direction or U & V (Vectors) m/s, knots, mph, kph, ft/min Wind Speed Wind Direction Air temperature Range Accuracy Resolution Relative Humidity 12 bit resolution...

Expandable, up to 10 Reference Quality Parameters Sensor Options Base Station MetPak Pro is available as a Base Station which enables the system to be specified with a remote wind sensor if required. This sensor can be positioned away from the Base Station and a connection cable is provided. Optional Rain Gauge The Base Station has been tested in accordance with BSEN 60945 and is suitable for use in marine environments. This system, which includes inputs for a Pt100 temperature sensor, tipping bucket rain gauge (available from Gill) and two analogue sensors, can also be specified without a wind...