technical specifications Winding speed (speed depending on process parameters) on cyclindrical tubes Ø 73 mm x 290 mm with freely programmable winding angle between 13° and 21° standard - 15 s cycle time - 8 tubes in magazine Traverse length Package diameter Package weight up to 12 kg or 26,5 lbs depending on the fiber material BCF, CF or spun - PES, PP, PA, natural fiber Count range gauge 800 or 1000 mm, 3 spindles per section Spindles, guides & feeder rollers individually driven and controlled by digital inverter Electrical supply Total connected load creel modules: depending on configuration High Speed Air Entanglement winder (depending upon process parameters and jet) Machine and process control Hyperion and Orion control system developed by Gilbos GILBOS of AMERICA, Inc. 1812 Antioch Road Dalton GA 30720 USA Tel. +1 706 529 3600 Fax +1 706 529 3595 [email protected] www.gilbos.com All technical details, descriptions, illustrations, dimensions and other particulars in this brochure are given in good faith, and can be subject to change without notice. Yarn Winding & Processing Machines GILBOS winding and processing machines for: Rewinding Rewinding + CMS Assembly winding AirEntangling AirTwisting SmarTwisting Heatset winding Yarn Winding & Processing Machines

Options and possible combinations High Speed Air Entanglement winder DynaJet SO - Standard Overfeed Entangling BCF and/or CF yarns for coarse counts up to 20 000 dTex or 18 000 den. Driven double feeder rolls with double yarn guiding: before and after the entangling. Modular entangling unit connected to the creel. Process speed up to 1000 m/min or 1100 yds/min, depending on process parameters. Compressed air pressure between 4 and 10 bar or between 58 and 145 psi. Overfeed rollers eliminate tension variations per end. Individually controlled tensioner and with tension sensor per end. Available...

Options and possible combinations High Speed Air Entanglement winder DynaJet SO - Standard Overfeed Entangling BCF and/or CF yarns for coarse counts up to 20 000 dTex or 18 000 den. Driven double feeder rolls with double yarn guiding: before and after the entangling. Modular entangling unit connected to the creel. Process speed up to 1000 m/min or 1100 yds/min, depending on process parameters. Compressed air pressure between 4 and 10 bar or between 58 and 145 psi. Overfeed rollers eliminate tension variations per end. Individually controlled tensioner and with tension sensor per end. Available...

technical specifications Winding speed (speed depending on process parameters) on cyclindrical tubes Ø 73 mm x 290 mm with freely programmable winding angle between 13° and 21° standard - 15 s cycle time - 8 tubes in magazine Traverse length Package diameter Package weight up to 12 kg or 26,5 lbs depending on the fiber material BCF, CF or spun - PES, PP, PA, natural fiber Count range gauge 800 or 1000 mm, 3 spindles per section Spindles, guides & feeder rollers individually driven and controlled by digital inverter Electrical supply Total connected load creel modules: depending on configuration...