AUTOMATIC WINDER FOR RESIDUAL PACKAGES
AUTOMATIC WINDER FOR RESIDUAL PACKAGES
The document describes a fully automatic residual winder designed for the recuperation of yarn from various sources such as tufting creels, carpet weaving creels, extrusion packages, and technical yarn packages.
The machine handles cylindrical packages with a 250 mm (10”) traverse.
It features a self-contained double spindle unit with minimal installation requirements.
The machine can accommodate packages with a diameter of up to 410 mm (16”).
Key features include spindles with individual motors and inverters for adjustable speed and crossing angle, a linear guiding system, electronic length measurement, a finger tensioning device, a package holder with a vibration damper, an electronically controlled anti-ribboning system, and options for air splicer or Fisherman’s knotter. An optional thermosplicer is available for wool and wool blends. The doffing system is efficient, with a tube magazine under the spindle and a vacuum system for catching the yarn end. The winding speed reaches up to 1,000 m/min (1,100 yds/min).
The machine automatically changes feed tubes/cones, picks up and splices ends, and doffs the package when the set length is reached.
Suitable for feed packages with tube/cone lengths up to 300 mm (12”), with capacities for various package diameters.
The machine processes PP, PA & PES BCF yarns and spun yarns with a count range of 600 to 20,000 dTex or 540 to 18,000 den. It requires an electrical supply of 3 x 400V or 3 x 480V + PE at 50 or 60 Hz, with a total connected load of 7.5 kVA per machine. Compressed air supply should be a minimum of 8 bar or 116 psi, with a ½ inch air connection.
The document also provides contact information for GILBOS in Belgium and the USA, and notes that technical details are subject to change without notice.
Catalog excerpts
AUTOMATIC WINDER FOR RESIDUAL PACKAGES YARN WINDING & PROCESSING MACHINES
Open the catalog to page 1
MAIN USE WINDING UNIT Fully automatic residual winder for recuperation of yarn from: ■ Tufting creels ■ Carpet weaving creels ■ Extrusion packages ■ Technical yarn packages PACKAGE TYPE ■ 250 mm traverse (10”) - cylindrical ■ Spindle with individual motors and inverters for adjustable speed and crossing angle. ■ Linear guiding system. ■ Electronic length measurement. ■ Finger tensioning device. ■ Package holder with vibration damper. ■ Electronically controlled anti-ribboning system. ■ Air splicer or Fisherman’s knotter. ■ Thermosplicer (optional) for wool & woolblends ■ Very efficient doffing...
Open the catalog to page 2
AUTOMATIC SPLICER OR FISHERMANN’S KNOTTER: SPLICER CREEL TYPES Mainly for feed packages with tube/cone lengths up to 300 mm (12”) and with a capacity for: packages with max. diameter of 100 mm (4”) • 20packages with aamax. diameter of 150 mm (6”) 15 • 10 packages with a max. diameter of 200 mm (8”) • 8 packages with a max. diameter of 2
Open the catalog to page 3
TECHNICAL SPECIFICATIONS PP, PA & PES BCF yarns - Spun yarns Count range Winding speed Package type Package diameter Electrical supply Total connected load GILBOS nv Grote Baan 10 BE-9310 Herdersem - Aalst Belgium Tel. +32 53 78 18 78 Fax +32 53 78 24 70 [email protected] www. gilbos.com GILBOS of AMERICA, Inc. 1812 Antioch Road Dalton GA 30720 USA Tel. +1 706 529 3600 Fax +1 706 529 3595 [email protected] www. gilbos.com All technical details, descriptions, illustrations, dimensions and other particulars in this brochure are given in good faith, and can be subject to change without notice. YARN...
Open the catalog to page 4All GILBOS catalogs and technical brochures
MULTIPURPOSE TAKE-UP WINDER4 Pages
