*mydirectindustry

UV-3711-308

Product catalog summary

Product Overview: The UV-3711-308 detector is specifically designed for measuring irradiance of 308nm Excimer lasers, commonly used in monochromatic UV-B therapy for treating psoriasis and vitiligo. Its flat spectral responsivity around 308 nm minimizes measurement uncertainty due to wavelength shifts.

Calibration: The detector's UV-B responsivity at 308nm is calibrated by Gigahertz-Optik GmbH's laboratory, ensuring traceable and accurate optical radiation measurements. Calibration includes absolute detector responsivity and individual relative spectral responsivity data.

Specifications:

Spectral Function: UV-B 308 nm
Typical Responsivity: 3 n/(W/m²)
Max Signal Current: 50 µA
Measurement Entrance: 11 mm Ø diffusor window with Cosine F.O.V.
Housing: 37 mm Ø, 32 mm height
Mount Side: M6 thread hole
Connection Cable: 2 m coaxial cable with various connectors
Operation Temperature: 5 - 40 °C

Re-calibration Options:

K-UV3711-308-S: Calibration of irradiance responsivity using a 308 nm reference lamp.
K-UV-SR: Calibration of relative spectral responsivity from 250-550 nm.

Compatible Devices: The detector can be used with various optometers and signal amplifiers from Gigahertz-Optik, such as P-9710, X1, X1-RM, P-2000, P-9801, and others, each offering different features for photometric and radiometric measurements.

Purchasing Information: The detector is available in different models with various connectors, each supplied with a calibration certificate. Re-calibration services are also available for maintaining measurement accuracy.

Contact Information: For further inquiries, Gigahertz-Optik GmbH can be contacted via phone or email.

Catalog excerpts

Product tags: UV , Detector , Laser , Radiometry , Broadband-meter Gigahertz-Optik GmbH

Open the catalog to page 1

The detector UV-3711-308 is designed for irradiance measurement of 308nm Eximer lasers used in monochromatic UV-B therapy for treatment of psoriasis and vililigo. The flat spectral responsivity around the 308 nm reduces the measurement uncertainty in case of wavelength shift of the Eximer laser. Traceable calibration Typical Spectral Response Calibration of the detector UV-B (W/m²) responsivity at 308nm is performed by the Gigahertz-Optik GmbH calibration laboratory for optical radiation measurements quantities. As with all light detectors supplied by Gigahertz-Optik calibration of absolute detector...

Open the catalog to page 2

Product Image Show product High-quality device for measurement of CW-, single pulse and modulated radiation. Features: Optometer for all detector heads with calibration data plug. Measurement modes: CW, pulse energy, dose, peak-topeak, effective luminous intensity (Blondel-Rey), data logger, battery, main power, RS232 Four-channel USB/RS232 optometer designed for mobile use. Features: Compact device for use with all photometric, radiometric, colorimetric, plant-physiologic and photo-biologic measurement heads from Gigahertz-Optik. USB and RS232 interface. Battery operation or power supply USB....

Open the catalog to page 3

Product Image Show product Highly sensitive trans-impedance signal amplifier. Features: High quality analogue amplifier with current-voltage conversion with minimal diode offset voltage (0.5mV) for short circuit photodiode operation of . 2.5s to 25s rise time depending on the amplification. Large I-U amplification range – 1×10-11A/V to 1×10-4 mA/V. TR-9600 High-speed 1µs or 100ns rise time data logger optometer. Features: Laboratory device for recording of clocked intensity progress readings in single light flashes, flash sequence or modulated light. Calculation of pulse data e.g. peak intensity,...

Open the catalog to page 4

Contact Person Gigahertz-Optik GmbH Tel. +49 (0)8193-93700-0 Fax +49 (0)8193-93700-50 [email protected] Gigahertz-Optik GmbH Powered by TCPDF (www.tcpdf.org)

Open the catalog to page 5