*mydirectindustry

RCH-005

Product catalog summary

Overview
The RCH-005 is a detector designed by Gigahertz-Optik GmbH for high irradiance light sources, suitable for applications such as solar simulators, high-speed imaging, environmental simulation, and UV curing. It is crucial for quantifying irradiance and energy to maintain consistent irradiation over the lamp's lifespan.

Specifications
The detector features a radiation sensing area of 9 mm with a RADIN sensing element. It operates at a maximum temperature of +100°C and includes a flexible light guide of 50 cm. The spectral response ranges from 320 to 460 nm, with a maximum irradiance of 40 W/cm².

Design and Functionality
The RCH-005 utilizes a RADIN element to withstand high temperatures and UV radiation. The design includes a flexible light guide that allows remote placement of the sensor element. The photodiode and UV bandpass filters are positioned outside the irradiated zone, connected via the light guide.

Calibration
Calibration is traceable and performed in Gigahertz-Optik’s Calibration Laboratory, ensuring accurate measurements in W/cm² and W/m².

Compatible Products
The RCH-005 can be configured with various optometers such as the X1, X1-2, P-9710, P-2000, P-9801, P-9802, X1-RM, and X1-PCB, each offering different features for photometric and radiometric measurements.

Purchasing Information
Available models include RCH-005-1, RCH-005-2, and RCH-005-4, each with different connectors and a flexible light guide. Re-calibration services are also offered.

Contact Information
For further inquiries, contact Gigahertz-Optik GmbH at [email protected] or call +49 (0)8193-93700-0.

Catalog excerpts

Product tags: UV , Detector , Curing , Radiometry , Broadband-meter Gigahertz-Optik GmbH

Open the catalog to page 1

Description Detectors for High Irradiance Light Sources High power irradiances light sources are in use for several applications Solar Simulators High speed Imaging Environmental Simulation UV Curing Irradiance and Irradiance Dose Quantification As a light source ages its light output changes so in a critical process the source irradiance and energy needs to be quantified to ensure a constant incident irradiation over the entire lamp operating time. Selection of Spectral Ranges from 250 to 400nm The effective radiation in a UV process typically falls within a narrow wavelength range within the...

Open the catalog to page 2

RCH-0 Head with Flexible Light ■wave length -RCH-X12 RCH-xl 3 RCH-xM -RCH-xl 5

Open the catalog to page 3

Configurable with Produktname X1 Product Image Show product Four-channel USB/RS232 optometer designed for mobile use. Features: Compact device for use with all photometric, radiometric, colorimetric, plant-physiologic and photo-biologic measurement heads from Gigahertz-Optik. USB and RS232 interface. Battery operation or power supply USB. Four-channel RS232 optometer designed for mobile use. Features: Compact device for use with all photometric, radiometric, colorimetric, plant-physiologic and photo-biologic measurement heads from Gigahertz-Optik. USB and RS232 interface. Battery operation or...

Open the catalog to page 4

Product Image Show product Fast response time trans-impedance signal amplifier. Features: High quality analogue amplifier with current-voltage conversion. Minimal diode offset voltage for short circuit operations. Bandwidths of up to 330kHZ. 1µs rise time. Large I-U amplification range from 10pA/V to 1mA/V. P-9202-5 Universal trans-impedance signal amplifier. Features: High quality analogue amplifier with current-voltage conversion. Minimal diode offset voltage (1mV) for short circuit photodiode operations. 20ms to 5s rise time depending on the amplification. Large I-U amplification range – 1×10-10A/V...

Open the catalog to page 5

Contact Person Gigahertz-Optik GmbH Tel. +49 (0)8193-93700-0 Fax +49 (0)8193-93700-50 [email protected] Gigahertz-Optik GmbH Powered by TCPDF (www.tcpdf.org)

Open the catalog to page 6