*mydirectindustry

PLL-1701

Product catalog summary

Description
The PLL-1701 is a high-speed transimpedance amplifier and digital data sampler designed for fast optical measurements. It features two amplifier modes: linear and logarithmic. The device includes an integrating sphere and detector for measuring optical power from fibers over a wavelength range of 400 nm to 1550 nm. Outputs are available as analogue voltage or digital data via USB or RS422. The analogue measurement conversion is capable of 200,000 samples per second, while digital measurement is limited by USB and RS422 transmission speeds (100 kHz). An external detector can also be used with a BNC current-input.

Flicker Measurements
The device supports flicker evaluation of lighting products with metrics such as Pst, SVM, Mp, Flicker frequency, Flicker index, and Flicker percent.

Amplifier Specifications
The linear amplifier offers fixed rise times of 16 µs or 500 µs across nine gain ranges for optimal signal-to-noise ratio. The logarithmic amplifier covers the entire dynamic range without needing gain switching.

Modes and Software
The PLL-1701 supports AA, ADC, and DAC modes, with a digital-to-analog converter for 16-bit data transfer. Windows-based software is provided for remote control and analysis, with an optional SDK for custom software integration.

Specifications

Input Interfaces: BNC (electrical), FC (optical)
Output Interfaces: BNC (±5V), USB
Measurement Range: Linear amplifier with various current ranges and rise times; Log amplifier with max current of +1 mA and min current of +100 pA
Calibration Uncertainty: Varies from ±5% to ±7.5% across different wavelength ranges
Function Generator: Provides electrical signals on BNC output from -5V to +5V
Temperature Range: Storage (-10 to 50) °C, Operation (10 to 30) °C
Power Supply: 9-24 VDC, 200 mA at 12 V
Weight and Dimensions: 550 g, 173.3 mm x 36.2 mm x 124.4 mm

Purchasing Information
Includes product model numbers and descriptions for the PLL-1701 optometer, calibration, and software development kit.

Catalog excerpts

Gigahertz-OptikPLL-1701 http://www.gigahertz-optik.de/en-us/product/PLL-1701Product tags: VIS , NIR Gigahertz-Optik GmbH

Open the catalog to page 1

High Speed transimpedance amplifier and digital data sampler The PLL-1701 optometer is designed for two different types of fast optical measurements with two different amplifier modes (linear or logarithmic). The device incorporates a small integrating sphere and detector for the measurement of optical power from fibers (FC connector) in W over the wavelength range 400 nm to 1550 nm. The measurement results can be output either directly as an analogue voltage (BNC) or as digital data via USB or RS422 interface. The pure analogue measurement conversion (transimpedance) to the BNC is with a speed...

Open the catalog to page 2

common functions to do remote control measurements and analysis via USB and RS422. Optionally an S-SDK-PLL1701 is available to implement the meter by the user's own software. rise time reduced (10 - 90)% 500 ps 500 ps 500 ps 500 ps 500 ps 500 ps 500 ps 500 ps 500 ps Measurement range Linear amplifier: range rise time max. current: +1 mA (analog output voltage: +4.8V) min. current: +100 pA (analog output voltage: -1.8V) Gigahertz-Optik GmbH

Open the catalog to page 3

spectral responsivity Calibration uncertainty Function generator temperature range Power Supply Interface Weight Dimensions Trigger Configurable with Spectral radiant intensity responsivity (400 - 1550) nm The PLL-1701 is able to provide electrical Signals on the BNC Output (function generator): -5 V to +5V, max. 10000 Values, clock speed 3|js - 900|js Miscellaneous Storage: (-10 to 50) °C Operation: (10 to 30) °C * temperature difference relative to the calibration temperature can increase the measurement uncertainty (9-24) VDC 200 mA bei 12 V USB V2.0 (Full Speed, HID Device); sampling rate...

Open the catalog to page 4