Product tags: Optometer , Industrial Applications , Dosimeter , Flash measurement , Blondel-Rey , Broadband-meter Gigahertz-Optik GmbH

Description P-9710-1 – Multi-functional light meter for highquality photometric measurements The P-9710-1 optometer is a high-quality device designed by GigahertzOptik for mobile use. Its signal amplifier provides a wide dynamic range for the detectors’ signal currents ranging up to 2 mA. The noise-equivalent current signal is as low as 0.1 pA. The device has eight gain ranges that can be manually or automatically selected for adjustment to match the signal levels. Variable integration time One of the characteristic properties of the P-9710-1 optometer is the short integration time of the input...

Light measurements and light analysis The P-9710-1 optometer has eighteen different measurement modes that can easily be selected using a user-friendly menu hence enabling its multifunctional application. P-9710-2 – Optometer for dose measurement of short pulses using the pulse stretching method Unlike the P-9710-1, the P-9710-2 optometer has a 20 ms standard time constant in all eight gain ranges. Thus light pulses shorter than 1 ns are stretched to 20 ms. The pulse energy of the stretched pulse can then be measured precisely with the 100 µs sample rate of the optometer. P-9710-4 – multi-functional...

Measurement ranges range (A / V) gain error ± offset error (at 20 °C) gain (A / V) analogue output Measurement range detector head The optometer P-9710-1, P-9710-2 and P-9710-4 can be combined with all single-channel detector heads from Gigahertz-Optik. The typical responsivities of the detectors in A/W, A/lx, etc. are specified in the corresponding specifications. These specifications can be used to calculate the measurement ranges of the measurement heads in connection with the P-9710-1, P-9710-2 and P-9710-4 optometer as described below: The measurement range of a light meter comprising of...

Measurement modes The product has eighteen different measurement modes that can easily be selected using a userfriendly menu hence enabling its multifunctional application. CW CW Maximum CW Minimum Peak Maximum Peak Minimum Peak to Peak I Pulse energy Relative (%) Relative (Log) Relative (Fact.) Hold CW Level Check Continuous measurements in the measurement interval of the selected integration time. Display of the current CW measurement value and the maximum CW value attained. Display of the current CW measurement value and the minimum CW value attained. Display of the current CW average value...

Offset correction Exceeding correction range Measurement parameter setup Via RS232 or using control panel on the front side. Settings are permanently saved (EEPROM). Ten different settings can be saved Data logger Max. 12288 entries, permanently saved in flash memory Miscellaneous Dimensions / Weight RS232 (9600 baud, 8 data bits, 1 stop bit, no parity) Plug: TRIAD01 (Tyco) Voltage supply Rechargeable battery, battery capacity: 6 V, 0.5 Ah Operation time: 5 hours with display backlight switched on, 12 hours with display backlight switched off 5.5 mm / 2.5 mm / 9.5 mm socket for plug-in power...

Product Image Show product Detector head for the measurement of scotopic illuminance in Lux [lx]. Features: f1 ≤ 3 %, f2 ≤ 1.5 %, 0.2nA/lx, 20mm height, for the usage with Optometers and amplifiers, calibration certificate High sensitive detector head for the measurement of photopic illuminance in Lux [lx]. Features: f1 ≤ 3 %, 2.8nA/lx, 20mm diffuser, for the usage with optometers and amplifiers, calibration certificate High sensitive detector head for the measurement of photopic illuminance in Lux [lx]. Features: f1 ≤ 3 %, 2.8nA/lx, 20mm diffuser, for the usage with optometers and amplifiers,...

Product Image Show product Integrating sphere detector for luminous flux (lm) of 2π spot sources. Features: 100mm dia, BaSO4 coating, 25.4mm dia port, for the usage with optometers and signal amplifiers, Calibration certificate Integrating sphere detector for luminous flux (lm) of 2π sources. Features: 150mm dia, BaSO4 coating, 38.1mm dia port, for the usage with optometers and signal amplifiers, Calibration certificate Integrating sphere detector for luminous flux (lm) of 2π sources. Features: 150mm dia, synthetic coating, 38.1mm dia port, for the usage with optometers and signal amplifiers,...

Product Image Show product Integrating sphere detector for luminous flux (lm) of 2π and 4π sources. Features: 500mm dia, BaSO4 coating, sphere to open, auxiliary lamp, for the usage with optometers and signal amplifiers, Calibration certificate VL-1101 module light detectors with photometric V(λ) responsivity Photometric detector head with DP-11 mount. Photometric detector head with M30x1 mount. Features: modular detector for use with integrating spheres, front lenses etc. For use with optometers and signal amplifiers Features: modular detector for use MD-37, SRT and other accessories. For use...

Product Image Show product Detector head for the measurement of irradiance in W/m². Features: spectral responsivity from 400-800nm (VIS), cosine fieldof-view, for the usage with optometers and amplifiers, calibration certificate Detector head for the measurement of irradiance in W/m². Features: spectral responsivity from 800-1000nm (NIR), cosine field-of-view, for the usage with optometers and amplifiers, calibration certificate Detector head for the measurement of irradiance in W/m². Features: spectral responsivity from 400-1000nm (VISNIR), cosine field-of-view, for the usage with optometers...

Product Image Show product Integrating sphere detector with short rise time for Laser power in W. Features: 8mm dia, ODM98 coating, 400-1100nm responsivity, optional SMA Adapter, for the usage with fast optometers and signal amplifiers, Calibration certificate Integrating sphere detector for Laser power in W. Features: 16mm dia, 3mm dia port, BaSO4 coating, 400-1100nm responsivity, for the usage with optometers and signal amplifiers, Calibration certificate Integrating sphere detector for Laser power in W. Features: 30mm dia, 5mm dia port, synthetic ODM98 coating, 400-1100nm responsivity, for...