P-9202-6
6Pages

Catalog excerpts

Product tags: Transimpedance amplifier Gigahertz-Optik GmbH

Description Transimpedance amplifier for Light Detectors Silicon, Germanium and Indium Gallium Arsenide Photodiodes offer best linearity correlation of light input to their electrical signal when are operated in photovoltaic mode. Simulation of a real short circuit at a signal amplifier input requires a current to voltage conversion amplifier with very low offset voltage independent of the selected gain range. Low noise output signal The P-9202 amplifiers assembled in a metal shielding housing equipped with low noise feedback resisters and gold contact read-relays for gain selection offer...

Open the catalog to page 2

Range Specifications Range Number Range Gain Slew-Rate Noise Error Offset*) *) The offset error is produced by the finite internal resistance of the current source. To calculate the offset error use the value in the column 'Offset' with the following formula: U: max. Offset Voltage at Output) R: internal Resistance of the current source (unit k)

Open the catalog to page 3

Remote Range Control The range can be selected via the remote interface. The rotary switch therefore has be set to "REM". By applying +5VDC voltage (current max. 25mA) at the corresponding control pin of the remote connecter Connector REMOTE (Connector Type: DSUB 9 pin The desired range is selected by applying a voltagi Remote range group selection Analog output (ROUT = 1 k) Remote range common of 5VDC between the corresponding pins an pin 8 Configurable with Produktname Product Show product

Open the catalog to page 4

Purchasing information Article-Nr Description Product Gigahertz-Optik GmbH Amplifier, with power supply and manual

Open the catalog to page 5

Contact Person Gigahertz-Optik GmbH Tel. +49 (0)8193-93700-0 Fax +49 (0)8193-93700-50 info@gigahertz-optik.de Gigahertz-Optik GmbH Powered by TCPDF (www.tcpdf.org)

Open the catalog to page 6