Gigahertz Optik GmbH

The BTS2048-NIR incorporates thermoelectric cooling of its InGaAs array detector and an uncooled InGaAs Diode for the BTS technology. The device meets all the requirements of a high-end diode array spectroradiometer and is favourably priced despite its cutting-edge design. Thermoelectric cooling of the array detector minimizes the dark noise signal. Other features such as an electronic shutter, OD filter and the proven BTS technology find their place as usual. • Spectral range from 950 nm to 1700 nm • BTS technology (integrated additional diode) • Electronic shutter and filter wheel with four...

S-BTS2048 User software interface Specifications General Short description TE cooled spectroradiometer with a wide dynamic range for CW and short-term measurement of the irradiance, spectrum, and peak wavelength. Accessories for other parameters. Main features Compact device. BiTec detector with TE cooled detector (512 pixels, 5.5 nm optical resolution, electronic shutter), and additional InGaAs diode. Optical bandwidth correction (CIE214). Filter wheel with shutter and OD-Filter. Input lens with diffusor window. Cosine field of view. Measurement range Spectral: 1E-4 W/(m² nm) to 2E4 W/(m² nm)...

Peak wavelength Band-pass correction mathematical online band-pass correction is supported completely linearized chip >99% Base line noise Dynamic range Spectral irradiance responsivity range (spectral measurement) Integral Detector Measurement range Nine (9) measurement ranges with offset correction Measurement range Optional: (1.5E-2 bis 2.5E7) W/m² responsivity range: (1000 - 1700) nm Optional: Spectral responsivity with radiometric matching. Online correction of the radiometric matching through spectral measurement data (spectral mismatch factor correction). Miscellaneous Microprocessor 32bit...

Mounting Tripod and M6 screw threads Front adapter UMPA-1.0-HL for use with integrating sphere port-frame UMPF-1.0-HL Temperature range Storage: (-10 to 50) °C Info * 1 typical value measured without averaging with an integration time of 1 ms (standard deviation). With averaging the base line noise reduces. * 2 typical value measured without averaging with a measuring time of 1 ms and full saturation of the detector. With averaging the SNR increases. *9 The device takes about 25 minutes to stabilize in temperature. If measurements are taken in the warm-up phase or at non-constant temperatures,...

Tube for stray light reduction. Tube for stray light reduction. 11.5° field of view. Front tube with 80° field of view. Front tube with 11 mrad and 100 mrad field of view. Material: Plastic. Front tube with 11 mrad and 100 mrad field of view. Material: Aluminum. Adapter for mounting an SRT-M37-L accessory. Required for radiance measurements. Filter holder for attaching filters in front of COS diffuser of BTS2048 devices. Filter size: 18 mm x 18 mm. Gigahertz Optik GmbH

We are known worldwide for excellent technical consulting and after sales support. Contact us to find together the best solution for you. Our services: • Technical Consulting & Sales • After-Sales Support • Calibrations & Re-Calibrations (ISO/IEC 17025 Calibration Services, factory calibration, Calibration of Third-Party Products) • Repairs & Updates • OEM & Feasibility Consulting of Customized Solutions Send us your inquiry or contact us by phone or e-mail. We would welcome your feedback too or review us on Google. An der Kaelberweide 12 82299 Tuerkenfeld, Germany Boston North Technology Park...