LOW PROFILE OSCILLATORS (LPO) 3 TO 10 GHZ SERIES FEATURES Low Profile Package Wide FM Coil Bandwidth Low Phase Noise Single Bias Supply Microwave Test Equipment Frequency Synthesizers Up & Down Converters Communications Systems Description The LPO 3-10 GHz series of YIG tuned oscillators provides excellent phase noise (typically better than – 104 dBc/Hz @ 10 kHz) in a low profile package. The FM coil bandwidth is typically greater than 3.5 MHz, allowing for faster frequency modulation and greater PLL bandwidths in synthesizer design applications. As an added feature, all oscillators of this series use a single positive 12 V supply. Model # Parameter General Characteristics Frequency Range RF Power RF Power Variation (Freq. & Temp.) Harmonic Level Non-Harmonic Spurious SSB Phase Noise 10 KHz offset 100 KHz offset Freq. Drift (over Temp.) Freq. Pulling (12 dB return loss) Bias Voltage & Currents +12 Vdc YIG Heater Power 20 to 32 Vdc 150 35 Steady State 400 surge 150 35 Steady State 400 surge 150 35 Steady State 400 surge Connection Capacity (per pin) Power Supply Pushing (+12 Volt) Main Coil Characteristics Sensitivity Bandwidth Linearity (from best fit line) Hysteresis Coil Impedance Ohms Inductance Connection Capacity (per pin) FM Coil Characteristics Sensitivity 3 dB Bandwidth Coil Impedance Ohms Inductance Connection Capacity (per pin) Packaging & Environmental Size (See attached figure) Weight Operational Case Temperature _______________________________________________________________________________________________ 1269 Corporate Center Parkway, Santa Rosa, CA 95407. Contact Information: Direct Phone: 925-328-4650, Fax: 925-328-4700 www.gigatronics.com [email protected] Form D2FJ

MICROSOME INC. LOW PROFILE OSCIUATORS (LPO) Envelope Drawing, LPO 530 Series YIG Oscillator /§\ IDENTIFICATION LABEL: MARKED WITH MODEL AND ORDER SPECIFIC CONNECTOR TABLE DESC. FUNCTION TYPE ENVELOPE DRAWING COMPANY CONFIDENTIAL: INFORMATION CONTAINED HEREIN IS THE PROPERTY OF MICROSOURCE INC. ITS USE OR REPRODUCTION IS PROHIBITED EXCEPT AS PROVIDED FOR BY PRIOR WRITTEN AUTHORIZATION FROM MICROSOURCE INC. THIRD ANGLE PROJECTION Customer Specific Applications If you don't see what you need, contact us. MicroSource takes pride in being a world class, fast turn design center for microwave YIG based...