YIG-tuned Oscillator LPO-0205-520-01
2Pages

LOW PROFILE OSCILLATORS (LPO) 2 TO 5 GHZ FEATURES Low Profile Package Low Phase Noise Single Positive Supply Microwave Test Equipment Frequency Synthesizers Up & Down Converters Communications Systems Description The LPO, 2-5 GHz, YIG tuned oscillator provides excellent phase noise in a very small, low profile package (1 x 1 x 0.5 inches) that maintains its EMI integrity using filtered feed-through connections on all DC inputs. Phase noise is typically better than –104 dBc/Hz @ 10 kHz offset for all oscillators of this series. As an added feature, all oscillators of this series use a single positive 12 V supply. Model # Parameter General Characteristics Frequency Range RF Power RF Power Variation (Freq. & Temp.) Harmonic Level Non-Harmonic Spurious SSB Phase Noise 10 KHz offset 100 KHz offset Freq. Drift (over Temp.) Freq. Pulling (12 dB return loss) Main Coil Characteristics Sensitivity Bandwidth Linearity (from best fit line) Hysteresis Coil Impedance Ohms Inductance Connection Capacity (per pin) Bias Voltage & Currents +12 Vdc YIG Heater Power 20 to 32 Vdc 150 35 Steady State 400 surge Connection Capacity (per pin) Power Supply Pushing (+12 Volt) FM Coil Characteristics Sensitivity 3 dB Bandwidth Coil Impedance Ohms Inductance Connection Capacity (per pin) Packaging & Environmental Size (See attached figure) Weight Operational Case Temperature 1269 Corporate Center Parkway, Santa Rosa, CA 95407. Contact Information: Direct Phone: 925-328-4650, Fax: 925-328-4700 www.gigatronics.com info@gigatronics.com Form D1GC

MICROSOME INC LOW PROFILE OSCILLATORS (LPO) Envelope Drawing, LPO 520 YIG Oscillator MODEL NJMBER LABEL CONNECTOR TABLE DESC. FUwCTrON CONNECTOR TYPE JXHfOU!.~™G HOLES 1. APPLICABLT: STANDARDS ^SPCaFKATlOHa 3- IDEHTiFICiTiON AND DATE COOE WBFLS WE NWWED WITH MODEL AND ORDER SPECIFIC NOMENCLATURE. SUPPLY VOLTAfiE 13 DETERMINED BV CUSTOMER REQUIREMENTS AND MODEL NUMBER ORDERED. CU&TOM=R RFOUIRFy ' Ml'i AND WOOFl N[lMBFR(lBnFR=D. IF NO-MINUS TAOF SPECIFIED BY CUSTOMER THEN NO -DCVoifJC FEECTHRL ENVELOPE DRAWING Customer Specific Applications If you don't see what you need, contact us....