UV-Exposure Box...for expose UV-ligth sensitive foils and plates UV Exposure Boxes shall used for exposure foto sensitive materials such as base materials, printed plates, front plates or foto sensitive films. Using the devices is very easy and user-friendly. The oscillator-based electronic timer allows the precise adjustment of the exposure time, only with 1-knob operation (mode, time, Start/Stop). The seven-segment LED display is showing the adjusted time and while the device is active the remaining time. The Exposure Boxes are designed for using in dry rooms, schools, living rooms, office, as well in laboratory and small factories Metal housing out of anodised aluminum profiles and plates. O Grindetglass plate with high UV transparency for UV-A wave length Specialflourescent lamps (type: ACTINIC), wave length 350 - 400nm (UV-A) O Evenlyillumination all of the lighting area O Constantcontact pressure between 22mm cellular material in the lid and the glass plate. O Electronic timer, selectable ranges 1-600seconds, or 1-100minutes, 1-knob handling, seven-segment LED display Subject to technical modifications without prior notice. O Electronic ballast according EN60929, EN-EC 03, EI=A2, no stroboscopic effect, no flicker, power factor >0,92 O Leadingbar for exact adjustment of films and plates Technical Data Gie-Tec GmbH An der Schlierbach 18 D-36132 Eiterfeld •Tel.: +49 (0)6672/919-910 E-Mail:[email protected]

• TheUVExposure Box is suited for ligth exposure of foto sensitiv coated materials, such as foto positive coated base material, Cobritherm, front plates and films for making printed plates. Other usings are not allowed. * Thedevice is designed for power supply 230V (50- 60Hz) and may used only in perfect technical condition. Using the Exposure Box it's not allowed by children and people which are not instructed. * All operations with the exposure box have to be done by professionals. Thereby they have to consider all instructions of the electronic industrie and the accident preventation. • Don'tuse...

gie - tec 1.4 Operation of the timer With the built-in-timer, you can adjust the ligthing duration of the UV-lamps. Time setting is possible in SecondMode or MinuteMode. Switch on the device, the timer is in “SecondMode”. Thereby the ON-time can be adjusted between 1 sec and 9min50sec. 3-digit, 7-Segment LED Display (remaining time) Display 3 Rotating knob and key combination to adjust mode, time and Start/stop These dots are shining only in MinuteMode This dot is shining when lid is open (only in device #140007 1000) Adjustment of exposure time After switch-on the device or plug in the power...

gie - tec Information of Safety and Risc: Declaration of Conformity of Exposure Boxes according EC-Directive 2006/95/EG Don´t start exposing time before lid of exposure box is closed. Gie-Tec GmbH An der Schlierbach 18 36132 Eiterfeld UV-A radiation can be dangerous for skin and eyes. Description and Identification of Device: UV Exposure Box 2 Art. Nr. 140017 These device is produced in accordance to following directives Low Voltage Directive (2006/95/EG) EMI-Directive (2004/108/EG) Quality Safety System Place, Date Rainer Giebel, Managing Director Gie-Tec GmbH UV lamps 230V/8W) for Exposure...