UV-Exposure Box
4Pages

UV-Exposure Box ...for expose UV-ligth sensitive foils and plates UV Exposure Boxes shall used for exposure foto sensitive materials such as base materials, printed plates, front plates or foto sensitive films. Using the devices is very easy and user-friendly. The oscillator-based electronic timer allows the precise adjustment of the exposure time, only with 1-knob operation (mode, time, Start/Stop). The seven-segment LED display is showing the adjusted time and while the device is active the remaining time. The Exposure Boxes are designed for using in dry rooms, schools, living rooms, office, as well in laboratory and small factories Electronic ¢ ballast according EN60929, EN-EC 03, EI=A2, no stroboscopic effect, no flicker, power factor >0,92 Grindet glass plate with high UV transparency for ¢ UV-A wave length Leading bar ¢ for exact adjustment of films and plates Special flourescent lamps (type: ACTINIC), wave ¢ length 350 - 400nm (UV-A) Evenly illumination all of the lighting area ¢ Technical Data Constant ¢contact pressure between 22mm cellular material in the lid and the glass plate. Item no.: Dimension (LxBxH) Mounting area Power consumption Number of UV tubes UV wave length Timer Electronic ¢ timer, selectable ranges 1-600seconds, or 1-100minutes, 1-knob handling, seven-segment LED display Subject to technical modifications without prior notice. Gie-Tec GmbH Metal housing out of anodised aluminum profiles and ¢ plates.

gie - tec 1. Starting up 1.1 Placement ATTENTION! l The UV Exposure Box is suited for ligth exposure of foto sensitiv coated materials, such as foto positive coated base material, Cobritherm, front plates and films for making printed plates. Other usings are not allowed. l is designed for power The device supply 230V (50- 60Hz) and may used only in perfect technical condition. Using the Exposure Box it´s not allowed by children and people which are not instructed. The device ought to be placed onto a horizontal, stable base (e. g. workbench, table) with the control elements pointing to the...

gie - tec 1.4 Operation of the timer With the built-in-timer, you can adjust the ligthing duration of the UV-lamps. Time setting is possible in SecondMode or MinuteMode. Switch on the device, the timer is in “SecondMode”. Thereby the ON-time can be adjusted between 1 sec and 9min50sec. 3-digit, 7-Segment LED Display (remaining time) Display 3 Rotating knob and key combination to adjust mode, time and Start/stop These dots are shining only in MinuteMode This dot is shining when lid is open (only in device #140007 1000) Adjustment of exposure time After switch-on the device or plug in the...

gie - tec Information of Safety and Risc: Declaration of Conformity of Exposure Boxes according EC-Directive 2006/95/EG Don´t start exposing time before lid of exposure box is closed. Gie-Tec GmbH An der Schlierbach 18 36132 Eiterfeld UV-A radiation can be dangerous for skin and eyes. Description and Identification of Device: UV Exposure Box 2 Art. Nr. 140017 These device is produced in accordance to following directives Low Voltage Directive (2006/95/EG) EMI-Directive (2004/108/EG) Quality Safety System Place, Date Rainer Giebel, Managing Director Gie-Tec GmbH UV lamps 230V/8W) for...