
SUSTAINABLE SOLUTIONS FOR YOUR COMFORT • Please read this instruction manual completely before installing the product. INTERNATIONAL 2026 • Installation work must be performed by authorized personnel only. Valid from 1st of January 2026 . Please retain this installation manual for future reference after reading it thoroughly.
Open the catalog to page 1Safety Precautions Thank you for purchasing Pureflow 200 inline filter box READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLING AND USING THE EQUIPMENT! THIS INSTRUCTION HAS BEEN MADE WITH THE GREATEST CARE. HOWEVER, THIS INSTRUCTION CONFERS NO RIGHTS. WE RESERVE THE RIGHT TO CHANGE ALL OR PART OF THE CONTENTS OF THIS INSTRUCTION WITHOUT PRIOR NOTICE. This instruction contains all information necessary for an optimal installation and startup by skilled personnel. It is absolutely important to follow the instructions in this manual very thoroughly in order to guarantee the correct function of the...
Open the catalog to page 2The filter box has been developed and produced for use in so called comfort ventilation systems and Controlled-environment agriculture (CEA). Any other use is considered an improper use and can lead to damages to equipment and persons; the manufacturer is not liable in such cases. The manufacturer is not liable for any damages caused by: • non-compliance of safety, operation and maintenance notes; • improper installation; • defects that occur due to improper connection or use and decontamination of the system; • after the warranty period has elapsed; • normal wear and tear. Please obey the safety...
Open the catalog to page 3Checking the Package Content In case of damages or incompleteness of the product delivered, please contact the supplier immediately. Package contents are: • • Installation Mounting Please assure a minimum clearance of 0.5 meter for maintenance purposes in front of the filterbox. Connect the air ducts to the corresponding duct connections DN 200 (8") or DN 160 (6") if adapters are used. Seal all air duct connections ensuring air tightness.
Open the catalog to page 45 MaintenancePeriodic maintenance is absolutely necessary for the system to run ■ * properly. The following maintenance work can be carried out by the end user: It depends on the operating conditions how often the filter has to be replaced. We recommend changing the filters when changing the filters of the heat recovery unit. Replace the filter (at least) every six months. In case of carbon filter - depending on air pollution 1 Stop the ventilation unit or fan; 2 Open front door, pull out filter; 4 Close front door. Only use genuine filters provided by the manufacturer. Installation manual
Open the catalog to page 5Contacts "GHT SOLUTIONS" Ltd 18; Block 19 Vincenti Bld, Strait Street, VLT 1432, Valletta, MALTA www.ghtsolution.com
Open the catalog to page 616 Pages
18 Pages
16 Pages