video corpo

Coreplus Synchro


Catalog excerpts

Coreplus Synchro - 1

SYNCHRO Easier and safer handling of large loads using 2 hoists GH’S SOLUTION: CORE+ SYNCHRO •Automatically keeps relative distances between hooks. Both horizontally and vertically. •Works with 2 hoists of same or different capacity, operating in same crane. •Touch-screen: easy configuration and crane monitoring (power consumption, alarms, system faults). •Easy to retrofit existing cranes. The CORE+ unit is affixed to the electrical panel door. No need to make manual adjustment of relative position between hooks •Hassle-free for operator: maintains relative positions automatically. •Minimal sensor requirement. Increased Productivity and Safety. 1/•CORE+ SYNCHRO continuously receives following inputs from VFDs: - Commands from operator (accelerate / decelerate). - Actual speeds (hoisting, trolley travel and crane travel). - Vertical position of each hook (given by the hoisting motor encoder). •Relative distance between trolleys (given by the laser rangefinder). 1/ Inputs from VFDs and laser 2/ Built-in exclusive Algorithm Algorithm determines, based on above inputs, optimal acceleration / deceleration rates. CORE+ SYNCHRO instructs VFDs how to perform the movement. TECHNICAL DETAILS Bi-directional communication between CORE+ and the VFDs for hoisting, trolley travel and crane travel. Connection via CANopen fieldbus. - Software is Upgradable via included USB port. - Requires VFDs for all 3 movements, incremental encoder at each lifting motor, and 1 laser rangefinder. - Does not require expensive or failure-prone sensors. Maintenance-free. - Closed-loop control: Maximum error in lifting 10mm. Maximum error in cross travel 50mm. - Works with 2 hoists in the same crane. - System can be easily connected/disconnected (using touchscreen or optional remote control). GH CRANES continuously improves its products, and therefore reserves the right to change this document. Latest re

Open the catalog to page 1

All GH Cranes & Components catalogs and technical brochures

  1. Corebox

    1 Pages

  2. ATV+AntiSway

    1 Pages

  3. GH Real Time

    2 Pages

  4. GHE17

    2 Pages

  5. Open winch

    12 Pages

  6. GH´NEWS 21

    32 Pages

  7. GH´NEWS 20

    28 Pages

  8. GH´NEWS 19

    71 Pages

  9. GH´NEWS 18

    11 Pages

  10. GH´NEWS 17

    5 Pages

  11. Twin Hoist

    2 Pages

  12. GH Motion

    18 Pages

  13. Mailing kits

    2 Pages

  14. GH´NEWS

    8 Pages

  15. Components

    14 Pages

  16. Automotive

    16 Pages

  17. Aeronautic

    16 Pages

  18. Jib cranes

    8 Pages

Archived catalogs

  1. GH end trucks

    12 Pages


    8 Pages

  3. Bridge cranes

    12 Pages