PARTS & ACCESSORIES

OUR MAIN GOAL IS TO OFFER AN AGILE, RAPID AND QUALITY SERVICE. OUR FACILITIES, OUR STOCK AND AN EFFICIENT MANAGEMENT SYSTEM GUARANTEE THIS SERVICE.

INDEX OF PRODUCTS 6-21 STRUCTURES 6 Electric chain hoists 26 Eye bolts and lifting points 47 Manual lever magnets 50 Slings and chain components 58 Radio control for bridge cranes 62 Safety power supply line 64 Spring-driven cable reel 65 Other safety equipment 69

GANTRY CRANES Standard gantry cranes Aluminium gantry cranes Motorised gantry cranes JIB CRANES Wall-mounted jib cranes Column jib cranes Special Jib cranes

GANTRY CRANES GENERAL CHARACTERISTICS CERTIFICATION The gantry cranes are delivered with the corresponding instruction manual and CE marking. IDENTIFICATION From the first stage of manufacturing, the equipment is identified by a serial number marked on the material. Once the product is finished, the gantry crane is delivered with an identification plate listing its specifications and characteristics.

STANDARD GANTRY CRANES Standard steel and hollow profile gantry cranes mounted on swivel wheels, making it possible to lift loads in places where there are no overhead cranes. BASIC CAPABILITIES SPAN Up to 8 m Other capacities and spans are available upon request Mechanically-welded construction, built in three pieces and with wheels made of white polyamide. Protected with RAL 1028 three-layer polyurethane paint. The PORTC type gantry crane is supplied with a load-carrying trolley and a power supply line. Optionally, they can be supplied with locking wheels, with swivel wheels, with a different...

Aluminium gantry cranes are Ideal for applications that require lightness. They are characterised by three features: • Low weight • Quick assembly and dismantling • High mobility SPAN Up to 6 m Other capacities and spans are available upon request CONSTRUCTION • Lightweight construction using bolts. A total of 8 bolts for an easy assembly of the bridge and sides. • Depending on the model, the assembly can be carried out by 1 to 3 people, while the height adjustment can be carried out by a single person. • Can be assembled in three parts, with folding legs for easy transport. • With white polyamide...

MOTORISED GANTRY CRANES Many manufacturers already provide this type of product, but this is distinguished by its ability to move a load of up to 6.3 t by reeling and rotating in all directions directly on the floor thanks to a push-button or radio control. BASIC CAPABILITIES SPAN Up to 10 m Other capacities and spans are available upon requestn USAGE Motorised gantry crane for interior and exterior use • Use on clean and smooth floors • Assembly using screws and nuts • 2 non-swivel motorised polyurethane wheels • Electrical switchgear with independent push-button control (48V control voltage)...

GENERAL CHARACTERISTICS It is the most effective accessory when an easy flow of materials, easy handling and movements of parts are required in one place. CERTIFICATION The jib cranes are delivered with the corresponding instruction manual and CE marking. CONSTRUCTION Protected by 3-layer painting, with a polyurethane finish in RAL 1028 yellow. PMTC HOLLOW PROFILE TYPE USAGE The maximum lifting speed must not exceed 8 m/min for any of the wall-mounted jib cranes. Not to be used for loads greater than those specified. OPTIONS The jib cranes are normally supplied in the standard model, although...

COLUMN JIB CRANES PRT TYPE WITH FULL ROTATION PFTC TRIANGULAR HOLLOW SECTION TYPE PFT TRIANGULAR STANDARD TYPE

The wall-mounted jib crane is the most economical solution provided a sturdy pillar or wall is available close to the work area. BASIC CAPABILITIES The usual way of anchoring is directly to the flange of the beam on which it is to be installed. The profile of the beams that are going to support the crane should be checked in relation to the RH and RV values estimated by the applicable coefficients. Technical data sheet on page 76

COLUMN JIB CRANES The column jib crane is the most economical and ideal solution when lifting and transferring the load through high turning angles. BASIC CAPABILITIES SAFETY The floor on which it is going to be installed should be checked in order to ensure that it provides sufficient support according to the RH and RV values estimated by the applicable coefficients. There are two possibilities for anchoring: direct to existing floor, by means of chemical anchoring, or anchoring by means of a concrete footing. Technical data sheet on page 78 This second option is the most recommended and It...

© COLUMN JIB CRANE WITH © AUXILIARY TOOL-HOLDING © FULLY ROTATING JIB CRANES

A lightweight crane system is the best solution for relatively low capacity jobs in certain workstations. Thanks to their modular concept and lightweight design, they can be manufactured up to capacities of 2000 kg. LIFTING CAPACITY HEIGHT Up to 10 m. Other capacities and spans are available upon request CERTIFICATION They comply with the machinery directive 98/37/EC. IDENTIFICATION They have CE marking and load plate, which identifies the MWL of the section. SAFETY It provides the operator with improved ergonomics, increasing productivity by avoiding unnecessary overexertion in use. CONSTRUCTION...

MODULAR AND FLEXIBLE HANDLING OF GOODS IN THE WORK AREA Depending on the load capacity, the bridge width and the transport flow of the goods, different section sizes can be chosen, which can be combined with each other both in the runways and crane girders. The travel of the carriage and the bridge can be carried out manually or electrically and continuously. The trolleys with plastic wheels guarantee the easy and noiseless movement of the load. ELECTRICAL POWER SUPPLY The following options are available for the electrical supply, both transverse and longitudinal. Flat hose Standard version C-Rail...

LIGHTWEIGHT PROFILES LINEAR HANDLING OF GOODS Monorails allow a linear transport for the connection of several workstations. Through changes of track, curved sections, interlocking and rotating platforms, the material can be transferred to the next manufacturing process. GISKB cross-travel trolleys and end carriages -rolling apparatuses- are designed, ont he one hand, for an easy movement of the load and, on the other hand, to guarantee the stability of the run.