Catalogs >
GGE srl >
ELEFANTINO ELB – GGE data sheet

ELEFANTINO ELB – GGE data sheet
4Pages

Catalog excerpts

Self-supporting extraction arms with extension USE • Suction of fumes, odors, vapors, gases, dusts, mists and other air pollutants, directly at the source point • Suction of polluted air at the point where it occurs, to prevent it from reaching the operator's respiratory tract FEATURES • Wide diameter range available: 100 mm - 150 mm - 200 mm • Length from 2.5 m up to 9.2 m, with the extension • Available for centralized systems without aspirator (ELB/C - EL/BAN) or supplied with aspirator from 0.55 to 2.2 kW (ELB) • Supplied as standard with PA slewing ring, with steel ball bearings (available with iron and teflon slewing ring) • Available in EX II 3D - EX II 2D - EX II 3G execution • Self-supporting structure with spring balanced pantograph • Springs with internal safety cable • The main moving parts are external to the air flow to ensure minimum maintenance and stability over time • Variety of materials for both hoses and rigid pipes • Terminal hoods with different shapes and materials, for every need GGE srl | Rio Saliceto (Reggio Emilia) Italy | www.gge.eu | info@gge.eu | tel. +39 0522 738411 | Texts, technical data and pictures are purely for guidance and do not represent contractual commitment for GGE srl | Data shee

Open the catalog to page 1

Self-supporting extraction arms with extension TECHNICAL DATA Ø Suction ELEFANTINO ELB [Extraction arm, Ø 150 mm, with 2800 rpm centrifugal fan] ELB1/5 ELEFANTINO ELB2 [Extraction arm, Ø 200 mm, with 2800 rpm centrifugal fan] ELB2/5 ELEFANTINO ELB/C [Suction arm, without fan, for centralized plants] ELB/C/15 ELEFANTINO EL/BAN [Flag, without fan] EL/BAN1 GGE srl | Rio Saliceto (Reggio Emilia) Italy | www.gge.eu | info@gge.eu | tel. +39 0522 738411 | Texts, technical data and pictures are purely for guidance and do not represent contractual commitment for GGE srl | Data sheet updated on July...

Open the catalog to page 2

Self-supporting extraction arms with extension Available in Atex Ex II 2D, Ex II 3GD version (also in stainless steel) Available in AISI 304, AISI 316 stainless steel version Available with high temperature flex, antiacid flex, antistatic flex Available with special shapes hoods and different materials Safety cable inside the springs SPARE PARTS • [ELP/NORAL] Version with iron washer, without bearings (only on Ø 150 mm) • [COLL/150] Double nylon-glass collar, Ø 150 mm • [PAL/ELB150] ELB arms support pole, Ø 150 mm • [PAL/ELB200] ELB arms support pole, Ø 200 mm • [PAL/2ELB] ELB double...

Open the catalog to page 3

Self-supporting extraction arms with extension PRODUCTIONS GGE srl | Rio Saliceto (Reggio Emilia) Italy | www.gge.eu | info@gge.eu | tel. +39 0522 738411 | Texts, technical data and pictures are purely for guidance and do not represent contractual commitment for GGE srl | Data sheet updated on July 2, 2023

Open the catalog to page 4