Catalogs >
GGE srl >
SCRUBBER - GGE data sheet

SCRUBBER - GGE data sheet
2Pages

Catalog excerpts

Washing towers USE • Odor reduction in the waste, composting and other sectors • Abatement of ammonia and other substances that are easily soluble in water • Abatement of acids and bases (hydrochloric acid, hydrogen sulphide, peracetic acid, sulfur and sulfuric anhydrides, hydrogen peroxide) • Galvanic industry FEATURES • Polypropylene construction • Construction with static beds or floating beds • Special horizontal bed construction • Special sizing based on the type and concentration of pollutant to be treated • Applications with use of water only or with chemical reagent dosing systems • Low initial and running costs • Made in Italy OPERATION • The air enters the tower from below and then goes up and through the central part. 7 • In this area there is contact with water which can be added with chemicals to obtain the abatement reaction. • The water is sprayed from above through nozzles which are fed by a pump that draws water from the bottom of the scrubber (tank). • The contact between the liquid phase and the gaseous one occurs on a surface which is constituted by the filling body of the tower, supported by special grids. • The filling is made up of special materials with geometry designed to offer large contact surfaces. 1. Washing liquid discharge 14. Washing liquid recirculation pump 2. Washing liquid tank 15. Reagent additive (optional) 16. Reagent dosing pump (optional) 4. Porthole for the discharge of the filling bodies 10. Washing liquid recirculation tube 5. Liquid-air contact area 11. Filling bodies support grid 18. PH / Redox probe (optional) 12. Liquid level control 6. Porthole for loading the filling bodies GGE srl | Rio Saliceto (Reggio Emilia) Italy | www.gge.eu | info@gge.eu | tel. +39 0522 738411 | Texts, technical data and pictures are purely for guidance and do not represent contractual commitment for GGE srl | Data

Open the catalog to page 1

Washing towers TECHNICAL DATA Model Air flow rate (Vatt = 1,0 m/s, Tcont = 2,0 sec) Air flow rate (Vatt = 1,5 m/s, Tcont = 1,35 sec) Air flow rate (Vatt = 2,0 m/s, Tcont = 1,0 sec) Planking height The suitability of the type of filter, the air flow rate and the type of cleaning must be checked according to any regulatory restrictions in force in the place of installation. Scrubbers with different diameters and different filling body heights are available on request. Special versions: Venturi Scrubber - Plate scrubber - Floating bed scrubber. SPARE PARTS • [DOS/REA] Reagent dosing system,...

Open the catalog to page 2