Self-supporting extraction arms USE • Suction of fumes, odors, vapors, gases, dusts, mists and other air pollutants directly from the source • Suction of polluted air at the point where it occurs, to prevent it from reaching the operator's respiratory tract FEATURES • Wide range available in diameters: 100 mm - 150 mm - 200 mm • Length from 2.5 m up to 9.2 m with the extension • Available for centralized systems without aspirator (ELP/C) or complete with aspirator from 0.55 to 2.2 kW (ELP) • Supplied as standard with PA slewing ring with steel ball bearings (available with iron and Teflon slewing ring) • Available in Ex II 3D - Ex II 2D - Ex II 3G execution • Self-supporting structure with spring balanced pantograph • Springs with internal safety cable • The main moving parts are external to the air flow to ensure minimum maintenance and stability over time • Variety of materials for both hoses and rigid pipes • Terminal hoods with different shapes and materials, for every need • Standard supplied with wall shelf GGE srl | Rio Saliceto (Reggio Emilia) Italy | www.gge.eu | [email protected] | tel. +39 0522 738411 | Texts, technical data and pictures are purely for guidance and do not represent contractual commitment for GGE srl | Data sh

Self-supporting extraction arms TECHNICAL DATA Ø Suction Hood capture speed ELEFANTINO ELP [Extraction arm, Ø 150 mm, with centrifugal fan, 2800 rpm] ELP/100 ELEFANTINO ELP2 [Extraction arm, Ø 200 mm, with centrifugal fan, 2800 rpm] ELP2/3/30 ELEFANTINO ELP/C [Suction arm, without fan, for centralized systems] ELP/C/10/25 GGE srl | Rio Saliceto (Reggio Emilia) Italy | www.gge.eu | [email protected] | tel. +39 0522 738411 | Texts, technical data and pictures are purely for guidance and do not represent contractual commitment for GGE srl | Data sheet updated on July 2, 20

Self-supporting extraction arms Available in Atex Ex II 2D, Ex II 3GD version (also in stainless steel) Available in AISI 304, AISI 316 stainless steel version. Available with high temperature flex, antiacid flex, antistatic flex Available with hoods of special shapes or materials Safety cable inside the springs SPARE PARTS • [ELP/NORAL]  Version with iron washer, without bearings (only on Ø 150 mm) • [COLL/150]  Double nylon-glass collar, Ø 150 mm • [PAL/ELP150]  Support pole for ELP arms Ø 150 mm • [PAL/ELP200]  Support pole for ELP arms Ø 200 mm • [PAL/2ELP]  Support pole for double ELP arms...

Self-supporting extraction arms PRODUCTIONS GGE srl | Rio Saliceto (Reggio Emilia) Italy | www.gge.eu | [email protected] | tel. +39 0522 738411 | Texts, technical data and pictures are purely for guidance and do not represent contractual commitment for GGE srl | Data sheet updated on July 2, 2023