SPHERON9 SP Heavy-Duty Lined Ball Valve R Full bore offers high cv values equal to the pipe Low torque as to compared to plug valves Min. 3,5mm thick lining option: 5mm thickness High permeation resistant virgin PFA lining Flanged full-bore ball valve PFA-lined, PN 10-PN 16/Class 150 Applications The GFT9 lined full-bore ball valve SPHERON9 SP is ideally suited for highly corrosive or abrasive application, where superior performance, tight shut-off and constant torque at almost no maintenance are required. Thanks to its wide range of optional linings it is suitable to handle a multitude of corrosive applications across a large variety of industries like chemical, fine-chemical, pharmaceutical, petro-chemical, pulp & paper and mining. The SPHERON9 SP has proven its superior performance as on/off, control or throttle device for fluids in liquid or gas form. Face to face dimensions are available in both DIN and ANSI standard. The standard design with hand lever can also be equipped with stem extension, heating jacket or lockable hand lever. Optionally it can be delivered for actuation, with positioner, gear box a.s.o. R Hysteresis free one piece ball-stem design, ideal for actuation Blow out safe shaft design Almost metal to metal contact - high, maintenance free tightness Locked in lining permits vacuum applications TA-Luft compliant gas tight selfadjusting packing, leakage rate A acc. EN 12266 Lockable hand lever as option Stem extension for insulated pipings as option Body lining materials: PFA, Antistatic PFA/AS, Ultrapure PFA/UP, FEP, PVDF, UHMW-PE, Ceramic Flange dimensions: Ball materials: PFA, Antistatic PFA/AS, Ultrapure PFA/UP, FEP, PVDF, UHMW-PE, Ceramic Face to face dimensions: Pressure range: Abrasion resistant options available Temperature range: Actuator connection: SPHERON9 SP is a registered trademark by GFT German Fluorolined Technik GmbH R

Item Material Body 1.0619 (A216 WCB), 1.4408 (CF-8M) Lining Body/Ball PFA, FEP, PFA/AS, PFA/UP, PVDF, UHMW-PE* Ball/Stem 1.0619 (A216 WCB), 1.4408 (CF-8M) Lever 1.0619 (A216 WCB), 1.4408 (CF-8M) Seat Rings PTFE/TFM, PTFE/AS, GF PTFE, o. o. req. *2 Bellow Packing PTFE/TFM, PTFE/AS Packing Gld Follower 1.0619 (A216 WCB), 1.4408 (CF-8M) Spring Gld Follower Spring Steel Bolts and Nuts Stainless Steel A2, A4, 5.6, o. o. req. * Ball options: 1 piece ball stem, 2 piece ball stem, V-control ball, Cavity free TF ball, SiC ball, AI AI2O3 ceramic ball *2 Abrasion resistant seat ring materials on request...