GMA200 MGSS
4Pages

Catalog excerpts

GMA200-MGSS Compact Gas sampling system with the proven GMA technology Efficient alternative to expensive Gas sampling systems Electronic sampling pump for sampling from limited access areas Fully automated flow monitoring Internal gas distributor for a catalytic sensor and two electrochemical sensors Condensate trap, water filter and flame arrestors to p

Open the catalog to page 1

A gas sampling system is required in all places where the gas atmospheres cannot be monitored with conventional transmitters and sensors. In order to reliably measure gases in narrow pipes under high pressure influence, or in complete closed cycle processes or under extreme temperature conditions, samples of the atmosphere must be first removed and placed in a valuable state. The concept The GfG gas sampling system GMA 200-MGSS combines all the necessary skills on the smallest space. With a size of only 30x30x10 cm, this it is the smallest available unit for such metrological...

Open the catalog to page 2

Optional extensions The GMA200-MGSS facilities customised on process with optional elements such as cooling coils, filters, a water barrier, Condensate trap and flame arrester guarantee a secure and permanent monitoring of dangerous gas concentrations. Through these options, the GMA200-MGSS is developed with each measurement task. The flame arrester If a gas sample is taken from a explosive area, it must be secured with a flame arrester. For this purpose, a flame arrester is integrated in the suction device GMA200-MGSS. In the event that the sample gas is supplied back to the explosive...

Open the catalog to page 3

Display and control elements: 2,2" graphics display and 5 keys; 15 status LEDs for alarms, operating and relay conditions Ambient conditions: for storage: -25..+60°C | 0..99%r.F. (recommended 0...+30°C) for operation: -20.. + 55°C | 0..99%r.F. Montage site: only inside up to an altitude of 2000 m above the sea level Power supply: Operating voltage: 100-240V AC 50-60Hz or 24V DC (20-30V DC allowable) Power consumption: max. 42 VA Fuses: F1=T 500mA (for GMA200) F2=T 500mA (for the gas sensors) F5=T 315mA (for the flow controller) Measurement gas feed Gas treatment: Cooling coil...

Open the catalog to page 4