GMA200-MGSS
2Pages

Catalog excerpts

GMA200-MGSS Display and control elements: 2,2” graphics display and 5 keys; 15 status LEDs for alarms, operating and relay conditions Gas Sensors: Catalytic Combustion Sensor: 1 sensor for the flammable gases and fumes Ambient conditions: for storage: -25..+60°C | 0..99%r.F. (recommended 0...+30°C) Electrochemical Sensors: 2 sensors for toxic gases and oxygen Terminal Blocks: 0.08..2.5mm2 on cross-section Relays outputs: Contacts: 8 relays with one inverter Cable: 3core ≥0.75mm2 LiYY, NYM (for GMA200 supply) RS485 outputs TRM Bus1: RS485; Half-Duplex; max. 38400 Baud (only for GMA200 relay module) Connection cable: Cable entries: 7 Pieces M16x1.5 (for Cable diameter 4.5-10 mm) Casing: Protection class: IP44 or IP54 (depending on version) for operation: -20..+55°C | 0..99%r.F. Montage site: only inside up to an altitude of 2000 m above the sea level Power supply: Operating voltage: 100-240V AC 50-60Hz or 24V DC (20-30V DC allowable) Power consumption: max. 42 VA Fuses: F1=T 500mA (for GMA200) F2=T 500mA (for the gas sensors) F5=T 315mA (for the flow controller) Measurement gas feed Gas treatment: Cooling coil (optional) Condensate separator with water barrier (optional) Flame arrester (optional) GMA Bus: RS485; Half-duplex; Max. 230400 baud (for GMA200- relay module, central unit, PC, PLC or gateway) Data logger (optional): 2GB microSD card with FAT (FAT16) formatting USB port: Mini-USB socket for device configuration with PC Compact Gas sampling system with the proven GMA technology Material: Plastic Weight: 2.1kg (depending on version) Dimensions: 270 x 290 x 98mm WHD (depending on version) Inlet switch: Solenoid valve (optional) Gas sampling system GMA200-MGSS, product brochure, English The information in this brochure is subject to technical changes due to further development. GMA200-MGSS/ENG/05-2016/1-200. Measuring gas pump: Membrane pump, flow controlled (optional) www.gasmessung.de info@gfg-mbh.com Efficient alternative to expensive Gas sampling systems Electronic sampling pump pump for sucking from inaccessible areas Fully automated flow monitoring Internal gas distributor for a catalytic sensor and two electrochemical sensors Condensate trap, water filter and flame arrestors to p

Open the catalog to page 1

Compact, flexible, safe Customization through optional extensions A gas sampling system is required in all places where the gas atmospheres cannot be monitored with conventional transmitters and sensors. In order to reliably measure gases in narrow pipes under high pressure influence, or in complete closed cycle processes or under extreme temperature conditions, samples of the atmosphere must be first removed and placed in a valuable state. The concept The GfG gas sampling system GMA 200-MGSS combines all the necessary skills on the smallest space. With a size of only 30x30x10 cm, this it...

Open the catalog to page 2