Fixed Gas Detection Systems For sophisticated gas detection systems

Fixed Gas Detection Systems – GMA200-MT Controller GMA200-MT For sophisticated gas detection systems and a wide variety of requirements As a DIN rail module, the GMA200-MT is perfectly suited for installation in control cabinets or wall-mounted housings. It is available in the versions GMA200-MT6 (for 16 transmitters, of which a maximum of 6 are analog) and GMA200-MT16 (also 16 transmitters, of which a maximum of 16 are analog). Together with the connected transmitters, it forms a stationary gas detection system for continuous measurement of gas concentrations. Its scope of performance makes...

Integrated relays Increasing demands on safety concepts, e.g. redundantly designed protective measures, result in gas detection systems becoming more and more complex. The GMA200-MT controller therefore features 8 internal relays. Six freely programmable alarm relays are available for implementing safety functions, protective measures and alarm functions. A wide range of options can be realized by means of the GMA200Config software: » the assignment of single or multiple measuring points to relays » individual alarms per measuring point and alarm limit value » configuration of collective or group...

Fixed Gas Detection Systems – GMA200-MT System functions LED status indicators The current status of the controller is displayed clearly and easy to grasp by colored LEDs: » R1-R8 » » » » » ON SRV/SRQ FLT/GMA FLT/TRM Alarm 1-3 Status of the internal relays (switched/not switched) Operating state service/service-request Controller fault Fault of a transmitter Alarms 1 to 3 Data logger For measured value storage, the GMA200-MT controller can be equipped with a microSD memory card. Measured values, average values, alarm events and faults are permanently stored at individually configurable intervals...

Fixed Gas Detection Systems – GMA200-MT GMA200Config Access to all options The configuration software offers a wide range of setting options, from selecting the language for the display, to scheduling relay contacts. For configuration, the GMA200-MT is connected to a computer via USB cable with mini USB plug. If it is not yet connected to a power supply, this can also be provided via the USB interface for configuration purposes. Password protected Access to the program is password protected and allows different authorization levels. These range from simple queries, such as an overview of all measuring...

Fixed Gas Detection Systems – GMA200-MT Extension by external relays The more complex gas detection systems become or the more widespread plants are, the more important it becomes to have enough relays and short cable runs between the relays and the devices to be switched. In addition to the 8 internal relays of the GMA200-MT, the controller is able to address up to 64 additional, freely configurable relays with a potential-free changeover contact, each by means of 4 external relay modules. External relay module in two versions GfG offers respective extensions for your gas detection system with...

Fixed Gas Detection Systems - GMA200-MT {j§{Jj}| Both versions feature 19 status LEDs for indicating the operating status, service requests and relay states. In addition, the GMA200-RTD's integrated 2.2-inch display shows exactly the same information about transmitters, measured values and alarms as shown on the controller, and can therefore be used as a remote display. The display of the GMA200-RTD is also backlit in green during normal operation and changes to red in the event of an alarm. The device is operated via five push buttons to the right of the display. User interface of the GMA200-RTD...

Technical Data: GMA200-MT Gases: Connection options: GMA200-MT6: GMA200-MT16: Inputs: External relay modules: Alarms: Alarm functions: Data storage: Environmental conditions: Temperature operation: Temperature storage: Humidity: Power supply: Power consumption: GMA200–MT6: GMA200–MT16: Relay module GMA200-RT: Displays and controls: Display: Interface: LEDs: Horn: Housing: Dimensions: Mounting: Material: Weight: Protection class: Approvals/Certifications: ATEX approval according to Directive 2014/34/EU: Electromagnetic compatibility: Electrical Safety: Functional Safety: Metrological suitability:...