Impulse Hammer WaveHitMAX
2Pages

Smart Impulse Hammer WaveHitMAX Easy Automated Single Hit Configuration The WaveHitMAX is the first smart impact hammer, offering innovative solutions for mechanical excitation in structural dynamic applications. With internal signal processing, it guarantees fully automatic, reproducible, and high-precision excitation without double hits. The user can set the number of hits, impact force and the delay between hits accounting for different degrees of damping / delay times. WaveHitMAX with mounting plate (optional) Reproducible, high precision single hit excitation Automatic and manual zero point search Automatic self calibration process (no presetting necessary) Internal processing of the sensor signal Configuration of magnitude and pulse width using the supplied accessories (weights and tips) Start the hit series via trigger, TTL signal or software Set impact forces Sensor calibration by accredited test laboratory (for MK2) All presettings like zero point or impact force search are made automatically by the hammer. Manual adjustment by the user is no longer necessary but for experts, there is an additional manual mode to take full control of the test process. WaveHitMAX offers new possibilities compared to the partially automated impact hammers. Advantages of internal signal processing: Fully automatic single hits, automatic search for user defined impact force, automatic zero point search, validation of the impact for quality assurance, change of the position between hammer and test object are possible and does not require a new setup. Via Ethernet, the WaveHitMAX can be operated quickly and easily via the supplied software on a Windows enabled device (PC or tablet). Experimental modal analysis Acoustic resonance testing Conditioning monitoring Material testing Impact hammer testing Frequency response function testing Software for operating WaveHitMAX

TECHNICAL DATA Smart Impulse Hammer WaveHitMAX TECHNICAL DETAILS BNC output ± 10 V, noise floor < 100 mV (1 %) or ± 5 V direct voltage sensor output (DIR) Via LED display on device or WaveHit GUI Impact release Fastening via prism rail / prism clamp, optional accessories Ethernet, trigger, integrated power supply, 240 V AC, signal out SENSOR SPECIFICATION Available ICP® force sensors ICP® force sensor – 445 N ICP® force sensor – 2224 N Linearity error Impact force2 Sensitivity MK1 (BNC output ADC/DAC) MK2 (BNC output DIR) AVAILABLE ACCESSORIES Hammer tip Thin metal Metal (hard) Plastic...