- Catalogs
- GF Piping Systems
- DN625 – DN1025 / 25” – 41” (Re)placing Uni/Fiksers of MULTI/JOINT® 3000 Plus
- Products
- Catalogs
- News & Trends
- Exhibitions
DN625 – DN1025 / 25” – 41” (Re)placing Uni/Fiksers of MULTI/JOINT® 3000 Plus
1 / 2 PagesView full catalog
DN625 – DN1025 / 25” – 41” (Re)placing Uni/Fiksers of MULTI/JOINT® 3000 Plus
Product catalog summary
Introduction
This document provides technical data and instructions for replacing Uni/Fiksers of the MULTI/JOINT® 3000 Plus system, specifically for sizes DN625 to DN1025 (25” to 41”). It emphasizes that the information is subject to change and is not binding unless confirmed in writing.
Specifications
The document includes a table listing the correct number of Fiksers (metal grippers) required for each pipe diameter (DN). For example, DN625 requires 58 Fiksers, while DN1025 requires 96.
Procedures
1. Check Table for Correct Number of Fiksers per DN: Ensure the correct number of Fiksers is used for each pipe size as specified in the table.
2. Check if ‘Fiksers’ Position is Correct: Verify that the metal grippers are positioned correctly during installation.
Recommendations
Consult with a local specialist or expert for further guidance and to ensure compliance with the latest standards and practices.
Contact Information
For additional support, users are encouraged to speak to an expert or find their local specialist.
This document provides technical data and instructions for replacing Uni/Fiksers of the MULTI/JOINT® 3000 Plus system, specifically for sizes DN625 to DN1025 (25” to 41”). It emphasizes that the information is subject to change and is not binding unless confirmed in writing.
Specifications
The document includes a table listing the correct number of Fiksers (metal grippers) required for each pipe diameter (DN). For example, DN625 requires 58 Fiksers, while DN1025 requires 96.
Procedures
1. Check Table for Correct Number of Fiksers per DN: Ensure the correct number of Fiksers is used for each pipe size as specified in the table.
2. Check if ‘Fiksers’ Position is Correct: Verify that the metal grippers are positioned correctly during installation.
Recommendations
Consult with a local specialist or expert for further guidance and to ensure compliance with the latest standards and practices.
Contact Information
For additional support, users are encouraged to speak to an expert or find their local specialist.
See more
Catalog excerpts
(Re)placing Uni/Fiksers of MULTI/JOINT® 3000 Plus
Open the catalog to page 1
D CHECK TABLE FOR CORRECT NUMBER OF FIKSERS PER DN CHECK IF ‘FIKSERS’ (METAL GRIPPERS) POSITION IS CORRECT Where next? Find your local The information and technical data (altogether "Data”) herein are not binding, unless explicitly confirmed in writing. The Data neither constitutes any expressed, implied or warranted characteristics, nor guaranteed properties or a guaranteed durability. All Data is subject to modification. The General Terms and Conditions of Sale of Georg Fischer Piping Systems apply. © GF Waga, MULTI/JOINT® 3000 Plus (Re)placing Uni/Fiksers DN625/CN1025 05-2026 / E
Open the catalog to page 2All GF Piping Systems catalogs and technical brochures
Product range ABS128 Pages
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.
Are you a buyer?
Are you a supplier?