PRIME SERIES PANEL+ (WITH BACKLIGHT) PANEL SPECIAL FEATURES Adjustable brightness of backlight (PANEL+) 109 keys incl. num pad and track pad Match with surgical panel (wall mount) Excellent tactile feeling Integrated Clean Mode for cleaning EN60601-1-2 Ed 4 certified SPECIFICATION Number of keys: Keyswitch technology: Switching cycles: Housing material: Housing color: Backlight: Interfaces: 109 (US-Layout) Carbon contact Approx. 2 mill. (per key) Silicone White & black Blue color, 5-level adjustable brightness USB 2.0 Cable length: Operating temperature: Storage temperature: Dimensions: Weight: Warranty: Certification: 15cm 0°C ~ +55°C -30°C ~ +70°C 365 (L) x 134 (W) x 14.2 (T) mm Approx. 415g 2 years EN60601-1-2 Ed 4, CE, FCC, RoHS, REACH Product Description CLEANTYPE® PRIME PANEL+ CLEANTYPE® PRIME PANEL CLEANTYPE® PRIME PANEL+ CLEANTYPE® PRIME PANEL White White Black Black US/DE/JP/KR/THAl US/DE/JP/KR/THAI US/DE/JP/KR/THAI US/DE/JP/KR/THAI Other layouts, configurations and interfaces on request. Customized key function on request (Firmware update via USB) GETT Gerätetechnik GmbH GETT Assembly (Asia) Co., Ltd. Mittlerer Ring 1 08233 Treuen Germany Room 806-7, Kowloon Plaza No. 485 Castle Peak Road Kowloon, Hong Kong, China 401 & 501, Building 1, No.97, Fuyong Area 107 Road Baishixia Community, Fuyong Street Baoan District, Shenzhen, China gett-asia.com gett-gro

EN60601-1-2 ED 4 CERTIFIED EN 60601-1-2Ed 4 applies to the basic safety and essential performance of Medical Equipment (ME) equipment and ME systems in the presence of electromagnetic disturbances and to electromagnetic disturbances emitted by ME equipment and ME systems. SHORT OPERATING INSTRUCTIONS Press and hold lock key for 5s to enable Clean Mode. Clean Mode is indicated by breathing backlight. Adjust backlight level with this button. Five level can be adjusted including off. CLEANING INSTRUCTION For further details please refer to below link: GETT Gerätetechnik GmbH GETT Assembly (Asia)...

INSTALLATION RECOMMENDATION FOR GCQ PANEL KEYBOARDS The keyboard is pre-certified according to the relevant EMC standards: IEC 60601-1-2: 2014 Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests GETT Gerätetechnik GmbH GETT Assembly (Asia) Co., Ltd. Mittlerer Ring 1 08233 Treuen Germany Room 806-7, Kowloon Plaza No. 485 Castle Peak Road Kowloon, Hong Kong, China 401 & 501, Building 1, No.97, Fuyong Area 107 Road Baishixia Community, Fuyong Street Baoan District, Shenzhen,...

The Prime panel is a built-in keyboard, it was tested "alone" reference to above EMC standard without taking the customer system into account. The keyboard integrator is responsible for complying with their required standards for the overall system and cannot be guaranteed by the keyboard manufacturer. For reasons of interference immunity, the reference potential of the installation / system must be considered when integrating the keyboard. To ensure that the keyboard works properly, we recommend that you observe the following installation recommendation. A distinction is made between two types...

Distances when installing in electrically conductive systems: When installing in metal panels (machines, systems, control cabinets, process control systems, etc.), ensure that there is sufficient distance between the conductive parts and the keyboard circuit board. The sufficient distance is defined by the system integrator following the necessary ESD test voltages requirement and the safety distances to electrically conductive components of the system. If the distances are too short, the capacitive touchpad and the keyboard can be influenced and damaged. USB cable: To ensure stable USB operation,...

These are general installation recommendations provided by keyboard manufacturer. It’s important to note that the necessary integration actions may differ depending on the system and must be ensured by the system integrator, considering the standards and regulations relevant for him. GETT Gerätetechnik GmbH GETT Assembly (Asia) Co., Ltd. Mittlerer Ring 1 08233 Treuen Germany Room 806-7, Kowloon Plaza No. 485 Castle Peak Road Kowloon, Hong Kong, China 401 & 501, Building 1, No.97, Fuyong Area 107 Road Baishixia Community, Fuyong Street Baoan District, Shenzhen, China gett-asia.com gett-group.com...