InduSmart ® Capacitive button PRODUCT FEATURES Available as illuminated or non-illuminated version Can be operated by light touch Pushbutton works wear-free, there are no moving parts Function control by means of integrated microcontroller Switching output characteristics is adjustable by Maximum front glass thickness is 6 mm glass or 3 mm plastic screen Flat design The output is configured as a potential-free contact as standard CE-conform according to EN 50581:2013 Cable KK27002 included • The button-light is dimmed in standby mode • The active mode is indicated by change the lighting brightness • RGB-LED lighting colour is adjustable by firmware INSTALLATION INSTRUCTIONS • Remove protective paper • Clean and degrease adhesive surface with isopropanol • Bring the surfaces to be bonded together and bond without bubbles Subject to modifications and errors GETT Geratetechnik GmbH Gett North America LLC Gett Asia Ltd. This qr code will take you to the Mittlerer Ring 1 | 08233 Treuen | Germany E-Mail: [email protected] E-Mail: [email protected] website with detailed informati- Tel: +49 37468 6601. Internet: www.gett-na.com Internet: www.gett-asia.com on about the capacitive switch. E-Mail: [email protected] Internet: www.gett-group.com

VISUALISATION OF THE SWITCHING PROCESS AS A DIAGRAM Debounce time Impulse characteristic „normal“ Switch output Within the debounce time, the status of the button actuation is checked every 10 ms. If the status is still ‘1‘, the debounce time will simply continue to run. No further fluctuations in the remaining debouncing time! 2.4 2.6 2.8 Debounce time Impulse characteristic „with key errors“ Switch output The status of the button actuation is checked every 10 ms during the debounce time. If the status no longer corresponds to ‘1’, an error counter is incremented. If the value of the error counter...

TECHNICAL DRAWING (in mm) front view side view back view 3 == Pin4: potential-free contact SI 2 == adhesive layer for mounting 7 == connector type: in customer application Wurth 653 104 124 022 or Molex 533980467 Subject to modifications and errors GETT Geratetechnik GmbH Mittlerer Ring 1108233 Treuen | Germany Tel: +49 37468 660-0 E-Mail: [email protected] Internet: www.gett-group.com Gett North America LLC