*mydirectindustry

Catalogs
GETELEC
THERMOPLASTIC ELASTOMER FILLED NICKEL GRAPHITE - GT 13100

THERMOPLASTIC ELASTOMER FILLED NICKEL GRAPHITE - GT 13100

Product catalog summary

Product Overview: The document provides technical specifications for GT 13100, a Nickel Graphite Filled Conductive Thermoplastic Elastomer. It highlights the material's stable electrical properties, good performance in low-frequency applications, and resistance to low temperatures down to -35°C.

Material Composition: The elastomer is thermoplastic with nickel graphite as the conductive filler.

Key Specifications:

Volume Resistivity: 0.03 Ω.cm (MIL G 83528)
Hardness: 55 Shore A (ASTM D 2240)
Density: 2.34 g/cm³ (ASTM D 792 Method A)
Break Resistance: 0.50 Mpa (ASTM D 412 Method A C)
Elongation at Break: 200% (ASTM D 412 Method A C)
Tear Resistance: 4.10 N/mm (ASTM D 624 C)
Residual Deformation: 40% after 70 hours at 100°C (ASTM D 395 Method B)
Operating Temperature: -35°C to +90°C
Color: Grey

Available Formats: The material is available for injection molding.

Performance Graph: A graph is included showing the shielding efficacy across various frequencies, indicating performance stability up to 10 GHz.

Catalog excerpts

THERMOPLASTIC ELASTOMER FILLED NICKEL GRAPHITE - GT 13100-1

GT 13100NICKEL GRAPHITE FILLED CONDUCTIVE THERMOPLASTIC ELASTOMER (ST Stable electrical properties Good performance in low-frequency Good resistance at low temperature (-35°C) Shielding efficacy available formats I Injection 375 Avenue Morane Saulnier, 78530, Buc - France + 331 39 20 42 42 - [email protected]

Open the catalog to page 1

All GETELEC catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list