Catalogs >
GETELEC >
Material Guide - Conductive silicone

Material Guide - Conductive silicone
1Pages

Catalog excerpts

Material Guide - Conductive silicone - 1

GUIDE TO CONDUCTIVE SILICONE SHEET SIZE 300mm x 300mm Thickness (mm) The conductive particles (10 to 40 micron) forming the load (between 60% and 80% of the load) of our conductive formulations can be varied in order to achieve the right formulation for each application and environment. All our formulations meet MIL G 83528 standard and guarantee to comply with your customer specifications. We use specific silicone grades as the basis of our formulations to which we add conductive loads so that they have electromagnetic shielding properties. The load used depends on the electromagnetic performance desired and the environment your equipment is working in. The 3 main objectives of our formulations: - electrical continuity performance - echanical performance (Residual deformation, elongation at break, etc.) m - Resistance to extreme temperatures Properties [ Standards] Elastomer binder Conductive filler Silver-plated copper Silver-plated copper Silver-plated copper Pure silver Pure silver Pure silver Density g/cm3 [ASTM D 792 Method A] Break resistance Mpa [ASTM D 412 Methode A C ] % Elongation at break [ASTM D 412 Method A C ] Tear strength N/mm [ ASTM D 624 C ] % Residual deformation after 70 hours compression at 100°C [ASTM D 395 Method B ] Working temperature °C Color Shielding performance: 20 MHz 100 MHz 500 MHz 2 GHz 10 GHz * MIL G 83528 Silver-plated nickel Silver-plated nickel Nickel Graphite Nickel Graphite Nickel aluminum Silver-plated glass bead Silver-plated aluminum Silverplated aluminum Hardness shore A [ ASTM D 2240 ] Thermoplastic elastomer Treated aluminum Treated aluminum Silverplated aluminum Nickel Graphite Light beige Light beige Dark grey Dark grey Light blue Available formats The tolerances applicable for control are those shown on this page except when a FAI, a DVI or a specific control document are requested to Getelec. vulcanization bonding All these mixture may be available in a fire/toxicity-retardant version (UL, FAR...), EN45545. All these products may be available in UL version on demand 375 avenue Morane Saulnier 78530 - Buc, France Tel : +331 39 20 42 42 | infos@getelec.n

Open the catalog to page 1

Material Guide - Conductive silicone 1Pages

Catalog excerpts

All GETELEC catalogs and technical brochures

Material Guide - Conductive silicone
1Pages