Guide to Corrosion-resistant conductive elastomer
Guide to Corrosion-resistant conductive elastomer
- Elastomer Binder: Options include Silicone and Fluoro-silicone.
- Conductive Filler: Choices are Silver-plated copper, Pure silver, Nickel graphite, Silver-plated aluminum, and Carbon.
- Volume Resistivity: Ranges from <0.005 to 6 Ω-cm depending on the material.
- Hardness: Measured in Shore A, ranging from 65 to 82.
- Density: Varies from 1.22 to 3.90 g/cm³.
- Break Resistance: Measured in Mpa, ranging from 1.37 to 4.61.
- Elongation at Break: Percentage ranges from 150% to 355%.
- Tear Strength: Measured in kg/cm, ranging from 8.6 to 14.
- Residual Deformation: After 70 hours at 100°C, ranges from 17.30% to 40%.
- Shielding Performance: Measured in dB across frequencies from 20 MHz to 10 GHz, with values ranging from 60 dB to 140 dB.
- Working Temperature: Ranges from -55°C to +160°C.
- Color: Options include Beige, Light Beige, Grey, Black, Orange, Blue, and Light Blue.
- Specific Mass at 25°C: Ranges from 1.10 to 1.46 g/cm³.
- Hardness: Shore A values of 40 or 60.
- Tensile Strength: Ranges from 950 to 1250 Psi (6.55 to 8.60 Mpa).
- Elongation: Percentage ranges from 300% to 500%.
- Residual Deformation: After 22 hours compression at 177°C, ranges from 20% to 33%.
- Color: Options include Orange, Blue, and Light Blue.
Catalog excerpts
SELECTION OF CORROSION-RESISTANT CONDUCTIVE ELASTOMER Conductive component Elastomer binder Conductive filler Silver-plated copper Pure silver Tear strength kg/cm Residual deformation after 70 hours at 100°C % Working temperature°C Light beige Color Sealing silicone component Specific mass at 25°C Residual deformation after 22 hours compression at 177°C % Light blue Light blue Color Available formats 375 avenue Morane Saulnier 78530 - Buc, France Tel : +331 39 20 42 42 | [email protected] Molded | Extruded | Cut | vulcanization-bonding
Open the catalog to page 1
Sealing silicone component Conductive silicone component Conductive silicone component Elastomer binder Conductive filler Nickel graphite Silver-plated aluminum Tear strength kg/cm Residual deformation after 70 hours at 100°C % Shielding performance : 20 MHz 100 MHz 500 MHz 2GHz 10GHz Working temperature°C Color Sealing silicone component Specific mass at 25°C Residual deformation after 22 hours compression at 177°C % Light blue Light blue Light blue Color Available formats 375 avenue Morane Saulnier 78530 - Buc, France Tel : +331 39 20 42 42 | [email protected] Molded | Extruded | Cut | vulcanization-bonding...
Open the catalog to page 2All GETELEC catalogs and technical brochures
Solutions for space industry9 Pages
Ventilation panel1 Page
MS composite gasket1 Page
NBC solutions1 Page
Microwave absorber GT6022 Pages
Microwave absorber GT5021 Page
Microwave absorber GT5011 Page
- GETELEC plastic seal
- GETELEC circular seal
- GETELEC O-ring seal
- GETELEC lipped seal
- GETELEC metal seal
- GETELEC flat gasket
- GETELEC round seal
- Elastomer seal
- Piston seal
- EPDM seal
- Polyurethane seal
- GETELEC silicone seal
- Oil seal
- Gas seal
- Water seal
- FKM seal
- GETELEC high-temperature seal
- GETELEC U-shaped seal
- Double-acting seal
- GETELEC industrial seal