Thermodynamic Steam Traps DK PN 40, PN 63/Class 600 Features of the DK series • Discharge with virtually no banking-up • Robust, insensitive regulator • Installation in any position • Max. admissible back pressure 80 % of the upstream pressure Compact steam trap for small condensate flowrates for discharging steam lines and tracing systems without banking-up of condensate Rhombusline body with enclosed, weather-resistant regulator for discharging steam lines and tracing systems without banking-up of condensate Compact steam trap for large condensate flowrates for discharging steam lines and tracing systems without banking-up of condensate Pressure/Temperature Ratings PN / Class 1) Limits for body/cover. Functional requirements may restrict the use to below the limits quoted. For full details on limiting conditions depending on end connection and type of regulator see data sheet. 2) ASTM nearest equivalent is stated for guidance. Physical and chemical properties comply with EN. Available End Connections and Overall Length L Screwed sockets Screwed sockets Screwed sockets Screwed sockets Screwed sockets DK 45 with flanged ASME: Overall length 172 mm on request.

Thermodynamic Steam Traps DK PN 40, PN 63/Class 600 Capacity Charts The charts show the maximum hot condensate capacities. Capacity Capacity Differential pressure ∆PMX Differential pressure Differential pressure