ViscobilleTM VCD – ViscoTestTM Comparing Viscosities Monitoring the Dilution of Lubricating Oil with Fuel Oil The new and improved GESERCO ViscoTestTM and ViscoBilleTM VCD falling ball viscometer make the comparison of viscosities simpler, faster and cost effective. Viscosity comparison is now direct and easy, without any requirement for using a temperature controlled bath, a thermometer, a stop watch or complex calculations. A common application of the GESERCO ViscoBilleTM VCD falling ball viscometer and ViscoTestTM is to monitor the dilution level of motor lubricating oils with fuel oil. GESERCO ViscoBilleTM VCD falling ball viscometer and ViscoTestTM are light and rugged, ready for field operation by any personnel, even if he is not a specialist, for monitoring the conformity of the tested liquid to specifications. The GESERCO ViscobilleTM VCD is a highly sensitive and accurate tool for cross comparing the viscosity of 1 tested liquid with the viscosities of 2 reference liquids which may set, for instance, the minimum and maximum acceptable viscosity for the tested liquid. The GESERCO ViscoTestTM allows for the simple and rapid comparison of the viscosity of 2 liquids. A typical application is to compare a sample of used oil against the same fresh oil and determine if the used oil viscosity is still within acceptable limits. The color scale makes the comparison very easy. The instrument has a strong construction and its syringe tip makes it easy to collect the sample to be tested. The strong polyamide body of ViscoTestTM is very resistant to shocks and chemical etching. Its handy design makes it very easy to clean and maintain. Testing black oils made easy The built-in* LED illuminator of ViscobilleTM VCD lights up the test tubes and makes the measuring balls easy to view even when testing black and heavily polluted oils. The color scale facilitates balls position comparison. Product Codes & Specifications Product Code ViscobilleTM ViscoTestTM Storage Cabinet Feel free to contact GESERCO for details Since 1973 GESERCO designs and manufactures a fully comprehensive range of rapid lubricant, fuels and solvent condition monitoring kits. Available worldwide, the Geserco products are applicable to the condition monitoring of mineral, synthetic and bio lubricants, whether they are motor oils, hydraulic oils or machining fluids. 9 RUE CAROLINE AIGLE – 33185 LE HAILLAN – FRANCE (T) +33 5 5634 9229 – (F) +33 5 5634 9544 – [email protected] SPECIFICATIONS MAY CHANGE WITHOUT NOTICE BRO.VCD.VT.GB