NUMBER 1 IN LUBRICANT CONDITION MONITORING ViscoBille™ V3T - ViscoBille™ V2T RAPID MEASUREMENT OF LUBRICANTS VISCOSITY MEASUREMENT OF THE DILUTION OF LUBRICATING OILS BY FUEL OILS The improved Viscobille™ V3T and Viscobille™ V2T viscometers by GESERCO give simple, rapid, accurate and cost effective measurement of the viscosity of lubricating, industrial and hydraulic oils. The viscosity measurement is direct and does not require using any stop watch nor thermometer, nor thermostatic bath nor complex calculations. Determination of viscosity at 20°C, 40°C, 100°C or any other reference temperature Equipped with an LED system that makes measuring balls easy to see Determines the level of dilution of engine lubricant by fuel up to 14%. Easy to use, no training required Viscosity Index calculation Direct reading of viscosity in cSt, from ISO to SAE grade Test Principle Testing black oils made easy Viscobille™ V3T and Viscobille™ V2T are falling ball viscometers whereby the viscosity of the tested sample is measured from the displacement of a calibrated ball in a calibrated tube. They have 4 measuring scales which provide direct and instant reading of 4 test results: The new and improved Viscobille™ have a built-in LED illuminator* that lights up the test tubes making the measuring balls easy to view even when the tested sample is black and heavily loaded with pollutants. (*Option) Viscosity in cSt 40°C Viscosity in cSt 20°C ISO grade SAE grade Metrological Specifications Others Specifications PRODUCT CODE APPLICATION LED cSt to 20°C cSt to 40°C V2T V2T V3T VI 95 to 110 Oils VI 140 to 165 Oils VI 95 to 180 Oils SPECIFICATIONS MAY CHANGE WITHOUT