Spot Test kit for Used Engine Oils Carbon Matters Contents Residual Detergent Capacity Residual Dispersant Capacity The GESERCO Spot Test kit allows for determining easily and quickly 3 important characteristics of engine oils in service: • • • the residual detergent capacity the residual dispersion capacity the carbon matters contents The test is simple and quick and can be used in the field by any personnel, even non-specialized operator. Test Principle The test uses a comparative method: a drop of oil to be tested is placed on a special filter paper. Within a few minutes, the oil drop spreads and forms a spot which is representative of its carbon matters content, dispersion capacity and detergent capacity. The spot is then compared to a reference chart for interpreting. Product Code Product Code Replenishment pack (25 tests) The GESERCO spot test kits includes all accessories, reagents and operating manuals for performing and understanding 50 tests unless otherwise specified. Test Time: 2 hours Carbon matters content: 6 grades from 0.2% to 2% Detergent & Dispersant Capacity: Good / Average / Poor Options Spot test extended guide: description and interpretation of 36 representative cases (Code ET9100) Feel free to contact GESERCO for details Since 1973 GESERCO designs and manufactures a fully comprehensive range of rapid lubricant, fuels and solvent condition monitoring kits. Available worldwide, the Geserco products are applicable to the condition monitoring of mineral, synthetic and bio lubricants, whether they are motor oils, hydraulic oils or machining fluids. 9 RUE CAROLINE AIGLE – 33185 LE HAILLAN – FRANCE (T) +33 5 5634 9229 – (F) +33 5 5634 9544 – [email protected] SPECIFICATIONS MAY CHANGE WITHOUT NOTICE