LubTest PremiumTM Test Kit Portable Mini-Lab for testing Diesel Engines Lubricants The GESERCO LubTest Premium™ Test Kit is a true portable lubricant analysis mini laboratory. The LubTest Premium™ kit is a stand-alone solution designed for monitoring three main characteristics of the lubricant on the Diesel Engine operation site: • • • Water content Viscosity Sea water detection The tests are simple and rapid, and the kit includes a detailed testing and interpretation guide so that the engineer can make immediate decisions for maintaining the Diesel engine and increasing its lifespan. Water in oil The presence of free water in lubricating oils, fuels oils, Diesel oils is a major cause of machinery failure. Water degrades the lubricating properties of the oil, narrows the lubricating film, builds up oxidation and acidity, minimizes the efficiency of additives, accelerates surface fatigue, corrodes components and allows for microbial development… Digital Rapid Oil Test Gauge – Water Presence Large and easy to read display gives step by step instructions. USB port downloads test results to your computer. Simple to use soft keys. Audible alarm for excess water in oil. Built-in memory stores up to 1000 tests including pass / fail test evaluation. Last generation sensor gives fast & accurate test results. User-friendly design makes the tester easy to handle. Transparent graduated flask facilitates test monitoring. To overcome the effects of water in the oil, the LubTest PremiumTM kit incorporates GESERCO’s state of the art Rapid Oil Test Gauge which provides accurate digital measurement of water in oil within minutes, even when the oil is massively additived. The GESERCO Rapid Oil Test Gauge is a documenting tester which not only provides fast, simple, accurate results for Water in Oil but also makes it easier to monitor the condition of used oils over time. • Test time : Battery life: 2 years (User replaceable battery) 1000 tests including measured data, test evaluation, date and time Mini USB port for downloading test results and updating firmware

Viscosity This test uses a ViscoTest™ viscosity comparator which allows comparing the viscosity of a used oil sample with the viscosity of the same oil when fresh. The strong polyamide construction makes the ViscoTestTM very resistant to mechanical shocks and to chemical etching. Test time : 3 visual detection levels: Red: Alarm / Orange: Average / Green: Satisfying Sea Water Detection This test uses a reacting method: a solution is added to the oil to be tested which will capture any possible chloride in the oil. A sample is then poured on a special reacting pad which will change colour according...