NUMBER 1 IN LUBRICANT CONDITION MONITORING CATALOGUE SOLUTIONS PARTICLES CONTENT BACTERIA DETERGENT DILUTION SAMPLING CARBON MATTERS CONTENT WATER

MULTIPLE TESTS KITS OCMS™ OCMS™ – Spectro LubTest Professional™ Test Kit CM1™ Test Kit CLM Test Kit CEVM Test Kit STM 1 Test Kit CE™ Test Kit LubTest Premium™ Test Kit Water in Oil + BN Test Kit TAN + BN Test Kit EVI Test Combination GoTest™ Kit CoolTest™ Kit CoolTest™ Mini Kit MFTest™ Professional - MFTest™ Premium DPOT ™ WaterTest™ Kit PreciWaterTest™ - UltraPreciWaterTest™ Chlorides / Salt Water Detection Kit Bacteria Test Kit Biocide TotalFuelWash BN Test Kit TAN Test Kit Iron Test Kit FWTest™ Kit PQ Test Soot Test Kit Spot Test Kit for Used Engine Oils ViscoBille™ V3T - ViscoBille™ V2T ViscoBille™...

TEST KITS

NUMBER 1 IN LUBRICANT CONDITION MONITORING Digital Precision Oil Tester DPOT ™ WATER IN OIL ANALYZER FOR LUBRICATING OILS, FUEL OILS AND SOLVENTS The new DPOT™ from GESERCO is the most advanced and innovative water in oil analyzer to be developed by the Number 1 Expert in rapid condition monitoring of oils in service. DPOT™ is based on the “Aquatest” water in oil analysis method which is standardized by ISO (1),AFNOR (2) and GFC (3) and which was continuously refined by GESERCO over the past 50 years. Standard NF T60-640 June 2018 | (3) Méthode GFC TR-40-A-14 Décembr

Digital Precision Oil Tester – DPOT™ WATER IN OIL ANALYZER FOR LUBRICATING OILS, FUEL OILS AND SOLVENTS Applicable to any type of lubricating oils and fuel oils (mineral, synthetic or bio-generated), solvents, alcohols, aromatic liquids, greases… Works with very small test samples down to 0,5 cc No hazardous chemicals for transportation, nor flammable, nor corrosive, nor CMR No interference of the lubricant additives on the analysis result, even when the proportion of additives is massive Memory for up to 500 test results, each being individually stamped and labeled Digital result delivered in...

Digital Precision Oil Tester - DPOT™ WATER IN OIL ANALYZER FOR LUBRICATING OILS, FUEL OILS AND SOLVENTS PREDICTIVE TEST MODE: The predictive measurement mode of DPOT™ is built on several tens of thousands of water in oil analyses produced by GESERCO over the past 50 years. When in predictive test mode, DPOT™ monitors carefully the release of water from the sample as well as the test profile. After a few tens of seconds of integration, the DPOT™ algorithm is able to predict the final water content of the sample with an accuracy better than ±10%. After a few minutes the final result is estimated...

Digital Precision Oil Tester - DPOT™ WATER IN OIL ANALYZER FOR LUBRICATING OILS, FUELOILS AND SOLVENTS Resolution: 5 levels from 1 ppm H2O to 1 %H20 Engineering units: %H20 volume, %H20 mass, ppml-hO volume, ppml-hO mass Test principle: Aquatest Test reagents: Reagent WT or Reagent WT/NH, solvent WT2** Measuring modes: 2 modes to choose from: (1) direct mode for high accuracy test results (2) predictive mode for fastest test results Time to test result: down to 90 seconds in predictive mode 3 end of test modes: 3 modes to choose from: (1) automatic end of test detection with user defined criterion...

NUMBER 1 IN LUBRICANT CONDITION MONITORING WaterTest™ Kit DETERMINATION OF WATER CONTENT INTO OILS, FUELS AND SOLVENTS Method derived from the ISO9114:1997 standard WaterTest™ Kit is based on the ‘’Aquatest’’ water in oil analysis method which is (2) (3) (1) standardized by ISO ,AFNOR and GFC and which was continuously refined by GESERCO over the past 50 years. The GESERCO WaterTest™ test kit allows for simple, fast and cost effective determination of the water content. Works even for analysis of lubricants with a high additive content, without interfering with the analysis result Immediate evaluation...

A high-performance measuringprinciple The Wateriest™ Mallette is a field “Aquatest”, a water content analysis technique standardized by ISO, AFNOR and GFC. A reagent transforms each water molecule present in the sample under test into a gas. The quantity of gas released produces a pressure exactly proportional to the water content. The pressure is measured by a latest-generation sensor, converted into %H20 or ppm H20 and displayed. The Rapid Oil Test Gauge in the Wateriest kit offers a simple and effective water monitoring solution. Not only does it enable precise measurement of water content...

NUMBER 1 IN LUBRICANT CONDITION MONITORING WATER CONTENT MEASUREMENT - IN OILS, FUELS & ANY NON-VOLATILE LIQUIDS Conforming to ISO9H4:1997, AFNOR NF-T60-640 and GFC TR-40-A-14 standards Works even when monitoring lubricants with a high additive load, without interfering with the analysis result Robust design protects glassware from analysis The GESERCO PreciWaterTest™ is the Reference Apparatus for water content measurement to ISO 9114:1997, GFC TR-40-A-14 and AFNOR NF-T60-640 standards. SPECIFICATIONS MAY CHANGE WITHOUT NOTICE PRECIWATERTEST™ ULTRAPRECIWATERTEST™ 2026/08 9

WATER CONTENT MEASUREMENT - IN OILS, FUELS & ANY NON-VOLATILE LIQUIDS As early as 1973, GESERCO invented the concept of the “Portable Lubricant Testing Kit” to enable any user in the field, right at the machine, to instantly check the condition of oils and fuels without having to send a sample to a laboratory. GESERCO's analysis kits enable early detection of possible breakdowns to avoid costly machine breakdowns, reduce operating costs and protect production resources. The presence of water in oils is a major cause of machinery failure. Water degrades the lubricating properties of the oil, narrows...

NUMBER 1 IN LUBRICANT CONDITION MONITORING IN LUBRICATING OILS AND FUELS OILS When combined with the GESERCO WaterTest™ or PreciWaterTest™ test kits for water in oil, the chlorides / salt water test kit allows for determining the source of water contamination (condensation of ambient moisture or ingress from the cooling system) and fixing the problem. Test Principle The test uses a reacting method: a solution is added to the oil to be tested which will capture any possible chloride in the oil. A sample is then poured on a special reacting pad which will change colour according to the chloride...