FlashTestTM Apparatus Manual Cleveland type Flash Point Tester The GESERCO FlashTestTM apparatus is a manual Cleveland type open cup flash point tester. It is intended for determining simply, quickly and cost effectively the flash point of any petroleum products, excluding fuel oils, from 79 °C to 400 °C. The flash point determination conforms to the ASTM D92, IP 36 and ISO 2592 standards. The apparatus also allows for determining the fire point. The test is simple and rapid, and the apparatus is delivered with detailed instructions. Test Principle Main Characteristics The test cup is filled up with a defined volume of sample to be tested. Electric heater Manual heating slope regulation Manual temperature reading Manual pilot flame Supply Voltage: The temperature of the test sample is first rapidly increased, then slowly and at constant rate as the flash point is neared. At specific temperature intervals a small test flame is passed across the cup. The lowest temperature at which application of the test flame ignites the vapours above the surface of the liquid is taken as the flash point. To determine the fire point, the test is continued until the application of the test flame causes the sample under test to ignite and burn for at least 5 seconds. Product Code & Specifications Product Code FlashTestTM apparatus Feel free to contact GESERCO for details. Since 1973 GESERCO designs and manufactures a fully comprehensive range of rapid lubricant, fuels and solvent condition monitoring kits. Available worldwide, the Geserco products are applicable to the condition monitoring of mineral, synthetic and bio lubricants, whether they are motor oils, hydraulic oils or machining fluids. 9 RUE CAROLINE AIGLE – 33185 LE HAILLAN – FRANCE (T) +33 5 5634 9229 – (F) +33 5 5634 9544 – [email protected] SPECIFICATIONS MAY CHANGE WITHOU