NUMBER 1 IN LUBRICANT CONDITION MONITORING FlashTest™ PM MANUAL PENSKY-MARTENS TYPE FLASH POINT TESTER Conforming to ASTM D93 standard The GESERCO FlashTest™ apparatus is a manual Pensky-Martens type closed-cup flash point tester. Designed for fast, simple and cost-effective determination of flash points in petroleum products, from the ambiant to 370°C. Determination of the flash point : fuel oils cutback residues used lubricating oils mixtures of petroleum liquids Determination of the flash point of petroleum products: distillate fuels lubricating oils homogenous petroleum liquids Stirring with rotating speed according to the specified method Manual temperature reading: from the ambiant to 370°C Manual heating slope regulation Determination of fire point Electrical heating Detailed instructions included Easy flame control Test Principle Metrological Specifications The test cup is filled up with a defined volume of sample to be tested. The temperature of the test sample is first rapidly increased, then slowly and at constant rate as the flash point is neared. The sample is placed in a closed cup, stirred and heated. A flame is briefly introduced at intervals to detect ignition. The lowest temperature at which application of the test flame ignites the vapours above the surface of the liquid is taken as the flash point. Others Specifications Standards: ASTM D93 - IP34 - ISO2719 Temperature: from the ambiant to 370°C Repeatability: 8°C Reproductibility: 15°C Supply voltage: 230V 50/60Hz Power: 1200W Dimensions: 42 x 26 x 32 cm Weight: 8.5 kg Product Code FlashTest™ PM: FP9002 SPECIFICATIONS MAY CHANGE WITHOUT NOTICE FLASHTE