NUMBER 1 IN LUBRICANT CONDITION MONITORING Digital Precision Oil Tester DPOT ™ WATER IN OIL ANALYZER FOR LUBRICATING OILS, FUEL OILS AND SOLVENTS The new DPOT™ from GESERCO is the most advanced and innovative water in oil analyzer to be developed by the Number 1 Expert in rapid condition monitoring of oils in service. DPOT™ is based on the “Aquatest” water in oil analysis method which is standardized by ISO (1),AFNOR (2) and GFC (3) and which was continuously refined by GESERCO over the past 50 years. Standard NF T60-640 June 2018 | (3) Méthode GFC TR-40-A-14 Déce

Digital Precision Oil Tester – DPOT™ WATER IN OIL ANALYZER FOR LUBRICATING OILS, FUEL OILS AND SOLVENTS Applicable to any type of lubricating oils and fuel oils (mineral, synthetic or bio-generated), solvents, alcohols, aromatic liquids, greases… Works with very small test samples down to 0,5 cc No hazardous chemicals for transportation, nor flammable, nor corrosive, nor CMR No interference of the lubricant additives on the analysis result, even when the proportion of additives is massive Memory for up to 500 test results, each being individually stamped and labeled Digital result delivered in...

Digital Precision Oil Tester - DPOT™ WATER IN OIL ANALYZER FOR LUBRICATING OILS, FUEL OILS AND SOLVENTS PREDICTIVE TEST MODE: The predictive measurement mode of DPOT™ is built on several tens of thousands of water in oil analyses produced by GESERCO over the past 50 years. When in predictive test mode, DPOT™ monitors carefully the release of water from the sample as well as the test profile. After a few tens of seconds of integration, the DPOT™ algorithm is able to predict the final water content of the sample with an accuracy better than ±10%. After a few minutes the final result is estimated...

Digital Precision Oil Tester - DPOT™ WATER IN OIL ANALYZER FOR LUBRICATING OILS, FUELOILS AND SOLVENTS Resolution: 5 levels from 1 ppm H2O to 1 %H20 Engineering units: %H20 volume, %H20 mass, ppml-hO volume, ppml-hO mass Test principle: Aquatest Test reagents: Reagent WT or Reagent WT/NH, solvent WT2** Measuring modes: 2 modes to choose from: (1) direct mode for high accuracy test results (2) predictive mode for fastest test results Time to test result: down to 90 seconds in predictive mode 3 end of test modes: 3 modes to choose from: (1) automatic end of test detection with user defined criterion...