NUMBER 1 IN LUBRICANT CONDITION MONITORING IN LUBRICATING OILS AND FUELS OILS When combined with the GESERCO WaterTest™ or PreciWaterTest™ test kits for water in oil, the chlorides / salt water test kit allows for determining the source of water contamination (condensation of ambient moisture or ingress from the cooling system) and fixing the problem. Test Principle The test uses a reacting method: a solution is added to the oil to be tested which will capture any possible chloride in the oil. A sample is then poured on a special reacting pad which will change colour according to the chloride content, hence determining saltwater presence. A reference chart allows interpreting the reaction of the pad and determining the chloride content in g NaCI per litre. Engineering units: NaCI/ liter Test Time: 10 min Product Code Chlorides / Salt Water Detection Kit: RC9300 30 additional test papers: RC9200 Test solvent, solution E, 500 ml: RC9201 The kit includes all accessories and consumables for testing up to 30 samples. tlGEGERCG EOUIPOEnT FOR TESTinB LUBRICRIITS SPECIFICATIONS MAY CHANGE WITHOUT NOTICE SALTWATER DETECTION KIT 2025/07