Chlorides / Salt Water Detection Kit In Lubricating Oils and Fuels Oils The GESERCO chlorides / salt water test kit allows for simple, quick and cost effective detection of the presence of salt water in lubricating and fuel oils. When combined with the GESERCO WaterTest™ or PreciWaterTest™ test kits for water in oil, the chlorides / salt water test kit allows for determining the source of water contamination (condensation of ambient moisture or ingress from the cooling circuitry) and fixing the problem. The test is simple and rapid, and the kit a detailed testing and interpretation guide. The kit is readily usable by any personnel, even non-specialized. Test Principle The test uses a reacting method: a solution is added to the oil to be tested which will capture any possible chloride in the oil. A sample is then poured on a special reacting pad which will change colour according to the chloride content, hence determining salt water presence. A reference chart allows interpreting the reaction of the pad and determining the chloride content in g NaCl per litre. Product Codes Product Code Chlorides / Salt Water test Kit 30 additional test papers Test solvent, solution E, 500 ml The kit includes all accessories and consumables for testing up to 30 samples. Test Time: 10 minutes Range: 0 to 5 g NaCl / litre Accuracy: 0.25 g NaCl / litre Feel free to contact GESERCO for details Since 1973 GESERCO designs and manufactures a fully comprehensive range of rapid lubricant, fuels and solvent condition monitoring kits. Available worldwide, the Geserco products are applicable to the condition monitoring of mineral, synthetic and bio lubricants, whether they are motor oils, hydraulic oils or machining fluids. 9 RUE CAROLINE AIGLE – 33185 LE HAILLAN – FRANCE (T) +33 5 5634 9229 – (F) +33 5 5634 9544 – [email protected] SPECIFICATIONS MAY CHANGE WITHOUT NOTICE